Basic installation instructions:
1) Wipe down and clean the area your decal/s will go. Make sure the area is clean, free from dirt and debris.
2) Peel off the decal from the backing paper.
3) Spray soapy water (slip) on the adhesive side of the film and on the area that the film is going to be placed on.
4) Carefully apply the decal onto the area. Make sure to lay the decal flat eliminating all air bubbles. If needed, use a felt edge tool or squeegee to assist with application.
5) Repeat steps for any additional decal. Press firmly and gently rub the decal with a microfiber cloth or a felt squeegee tool while applying heat to assist with adhesion.
Please feel free to contact us if you have any questions or issues.