8mm Animal Feed Pellet Mill Machine 220V

Three Rollers
 https://topseller365.com/data/prd/239/230/020.jpg

1. Iron or stones cannot be put into the griller.

2. Check the elasticity of the belt, and the bearing frequently.  Add oil in time when it needs to.

 3.The machine not be used for wood chips.

4.If the feed material is hay, do not add the hay directly to the machine, mix the hay with the wet grass and add it to the machine. Avoid hay clogging the machine resulting in burning the motor.

 

Voltage: 220V

Power:  4500w

Motor speed : 1800 rpm

output: 120-150KG per hour. Three rollers !

Grinding pellet size 8 mm (other size please contact us) 

 

　
Operation:
1: Add oil into gearbox before start.

2: Double-check the belt and the screws before operation.

3: Clean up the rest after use to prevent damage to the machine.

Note:

1. Before using the machine, it is necessary to adjust the screw of the pressure roller to the appropriate position. The pressure roller and the pressure plate should be closely combined, and the three adjusting screws should be on the same horizontal plane.

2. Please refuel the fuel tank before using the machine. The machine should not idle for more than 2 minutes.

3.Double-check the belt and the screws before operation.

4.Clean up the rest after use to prevent damage to the machine.

5.If the pressure roller cannot rotate normally, please tighten the screws that control the pressure roller first, and then try to power it on. If it still does not work, you can appropriately loosen the screws next to the pressure roller and then tighten them slightly again (without special tightening)

　
Feature:
https://topseller365.com/data/prd/239/230/024.jpg

Adjustable nut Used to adjust the distance between the pressure roller and the grinding disc. When making pellets, the nuts on the three sides must be balanced to avoid damage to the pressure roller and grinding disc.

If the pressure roller cannot rotate normally, please tighten the screws that control the pressure roller first, and then try to power it on. If it still does not work, you can appropriately loosen the screws next to the pressure roller and then tighten them slightly again (without special tightening)

 https://topseller365.com/data/prd/239/230/026.jpg

Here is the filling port, open here to add engine oil

It is recommended to add high-quality machine oil or hyperbola heavy-duty gear oil.（The color of the oil filling plug is random）

 
https://topseller365.com/data/prd/239/230/028.jpg

The length of feed particlescan be adjusted here.

 https://topseller365.com/data/prd/239/230/112.jpg

After using the machine for a period of time, the customer needs to add lubricating oil here to lubricate the grinding chamber (approximately 4-6 months of use) (the lubricating oil gun and lubricating oil need to be purchased by the customer themselves, we do not provide them).

We suggest that high-power machines should be directly connected to the main power supply, as the voltage reaching the machine is stable. If the voltage is unstable and the current exceeds the rated current of the motor, it is easy to burn out the starting capacitor.

It is recommended to directly connect to the power supply as much as possible. If the machine is not connected to the power supply, different situations may occur, and the wires are not durable. The wires will gradually burn out over time.

Our machine is not equipped with a plug. If you do not know how to operate the wiring video, you can contact our customer and we will provide you with the wiring video. (If there are occasional situations with plugs, it is also recommended that you remove the plugs when wiring).

 

 

 

       

 

 
Item  include(239174):

1set Chicken Feed Pellet Mill Machine 220V 
 

On Sep 9, 2024 at 19:31:04 PDT, seller added the following information:

DataCaciques