PLEASE READ ENTIRE DESCRIPTION BEFORE YOU BUY!

If you are unsure how to install the manifold and or carb after reading an Installation Guide, please take your  part(s) to a licensed or certified mechanic for install. I cannot be held responsible for damaged product due to buyers lack of knowledge.
I do not accept returns due to buyers remorse, lack of understanding how to install, product damaged during installation or incorrect product purchased for your particular bike. If you have any questions, please contact.

Manifold is bolted on with the reason... Once fuel goes trough manifold it cools it down. So it is very important to keep manifold heated up. Bolt on manifold is attached to the cylinders and heat is transferred to the manifold. F.ex. mounted with rubber boots or so, mounted different way, single carb set up wont work properly because mixture will be rich no matter what jetting is. Let say you having a moonshine distillation machine... that develops a liquid from the steam. Long story short. Manifold should be warm enough to deliver atomized fuel in to the engine as a gas.

All items are shipped via DHL Express international service, so it is guaranteed safe and on time delivery. Usually it takes from 3 to 9 business days worldwide.

Manifold is designed to fit all Yamaha Virago XV500, 535, 550.

Manifold with a rubber mount with 40 mm ID.

STRICTLY FOLLOW THE INSTALLATION GUIDE BELOW!

WARNING! DO NOT INSTALL THE MANIFOLD WITHOUT GASKETS TO PREVENT DEFORMATION OF THE FLANGES. MANIFOLD WONT FIT WITHOUT THE GASKETS. THIS IS MANDATORY!

BLACK RTV on gaskets must be used installing the manifold to assure 100% seal.
1. Apply RTV on cylinder heads
2. Stick the gaskets and let them sit for a while.
3. Apply RTV on the manifold and gently tie the bolts.
4. Let it dry for about 45 min - 1 hour.

Materials
Aluminum {black powder coated}

Parts Included
Manifold
2 x gaskets
Rubber adapter
2 x steel clamps