Pools - Spas - Stoves - Fireplaces

BioGuard Smart Shock 2lb -  Single Bottle - Part #22948BIO/1

Purpose:

Description

BioGuard Smart Shock is a multi-functional product that shocks, oxidizes, buffers, and clarifies pool water. It kills and prevents bacteria growth. This product has unique blue algae-fighting crystals that kill unsightly algae. There is no need to mix or pre-dissolve, just add it directly to your pool water. This product has also been proven to improve filter efficiency. Start swimming in as little as 15 minutes after application. Keep your pool water sparkling clear and brilliant looking with Smart Shock.

Dosage

1 lb per 12,000 gallons of water.

Directions

Make sure all pool equipment is working properly, including pump, filter, skimmer and heater. Backwash filter following manufacturers directions. Check alkalinity, pH, and calcium hardness with a test kit. Adjust alkalinity to 125-150 ppm. Adjust pH to 7.4-7.6 by adding a pH decreaser or pH increaser. Adjust calcium hardness to 175-275 ppm. When using other products outlined in directions for this product, always follow directions on those products.

Routine Maintenance:

  1. With pump running, broadcast 1 lb. of BioGuard Smart Shock per 12,000 gallons of pool water, directly into pool around edges.
  2. Brush any undissolved product off pool surfaces.
  3. Wait at least 15 minutes after product application before entering pool.
  4. Operate pump and filter continuously for 48 hours after product addition.
  5. For best results, apply product weekly as part of your maintenance routine.

If Light Algae Present:

  1. Vacuum leaves and any other foreign debris from pool. Brush visible algae thoroughly from pools surface with a surface-compatible brush.
  2. Brush any undissolved product off pool surfaces.
  3. With pump running, broadcast 1 lb. of BioGuard Smart Shock per 12,000 gallons of pool water, directly into heavy algae areas of the pool.
  4. Operate pump and filter continuously for 24 hours after product application.
  5. Afterwards, repeat brushing off pool surfaces.
  6. Do not enter the pool until the free chlorine residual is 1-4 ppm.
  7. If necessary repeat the treatment.

Ingredients

Sodium dichloro-s-triazinetrione: 63.05%, Copper (metallic): .26%, Other Ingredients: 36.9%, Available Chlorine: 39

General Policies

Keep your home running smoothly with Clearview, the Clear Choice for your pool, spa and hearth needs! If you have any questions, please contact us before buying. We pride ourselves on offering exceptional customer service and helping to provide you with the complete information you need to make an informed purchase.

Shipping and Billing:

  • We only accept payment from and ship to confirmed PayPal addresses
  • All packages are shipped within one day of ordering

Returns:

  • Returns are not accepted on opened or used products and are subject to 10% restocking fee
  • If a package arrives damaged or defective, please report it to use immediately so we can promptly take care of the situation

Questions:

If you have any questions, please contact us. We will always take the time to answer your questions. We have over 25 years in the industry, so don’t hesitate to ask! We’ve probably heard it before!

Business Hours:

Weekdays 9 - 5 | Saturday 9 - 4 | Eastern Time


Disclaimer: 

  • I will follow all applicable federal and state laws and regulations regarding the sale of the pesticide
  • I won’t accept bids from, sell to, or ship to states in which the pesticide is not registered as a general-use product