Pools - Spas - Stoves - Fireplaces

Poolife Back to Blue Shock System

Part # 92106

If you are experiencing a severe algae bloom, which has turned your pool green, the POOLIFE Back to Blue Shock System can turn your pool sparkling blue again. This two-part system destroys the bacteria and algae that have taken over your pool and then makes it easy to vacuum out. At the start of the season, or if a severe algae bloom occurs during the season, the pool can be treated and returned to its clear blue appearance within 24 hours by using POOLIFE Back to Blue I and POOLIFE Back to Blue II as part of the POOLIFE Back to Blue Shock System.

Product Benefits:

• Good for all pool surfaces
• Restores water clarity
• All-in-one chlorinates, shocks, and kills algae
• Transforms water from green to blue in 24 hours
• Drops particles and dirt to bottom of pool
• For use only with systems that allow vacuum to waste
• Treats pools up to 15,000 gallons

Water Balance:

For best performance, swimmer comfort, and crystal clear water: Maintain pH in the range of 7.2 to 7.6. Maintain total alkalinity in the range of 60 to 120 ppm. Maintain calcium hardness above 200 ppm. Use a Poolife test kit that measures all these ranges. Follow label directions for each product. Re-entry into treated pools is prohibited above 4 ppm due to risk of bodily harm.

Directions for Use:

1. Add 2.6 lb of Poolife Back to Blue 1 per 15,000 gallons of water into the pool with the circulation system turned on. If any granules settle to the bottom, use a brush to disperse.
2. Once completely dispersed, change valve to recirculate position and add 2 lbs of Poolife Back to Blue 2 per 15,000 gallons through the skimmer.
3. Leave system circulating for 1 hour, then turn off the filter pump and allow sediment to settle overnight.
4. The following day, change valve to vacuum position and vacuum the sediment to waste.
5. If the pool has not settled out or is not blue, repeat steps 1, 3 and 4.
6. Return valve to filter position after pool has been vacuumed.