Cable Repair Kit this repair kit is designed for repairing the heating cable that is damaged during installation of the heating cable or mat. The kit includes jumper wires to bridge the heating element after the damaged section is removed.

 

Simple butt connectors that replace the damaged section of your heating cable.

Only 1 kit needed per damaged section.

 

The heat mat/cable MUST then be tested. The heating cable resistance should be compared to the value within the instruction manual. The insulation resistance MUST also be measured and should be greater than 500 M Ohms. 

 

As with all electrical projects governed by Part P regulations, all mains electrical connections must be undertaken by a certified electrician. 


Inline Cable Kit includes: 3 Butt connectors, 4 branded cable ties, branded heat shrink


Cable Termination Kit: 3 Butt connectors, 4 branded cable ties, branded heat shrink (1200mm strip) & Branded adhesive heat shrink (1500mm) & 3 branded crimp terminals (when ordering confirm the diameter/sq mm size of the cable core you are using for the cable lug and the eyelet size you require!)