The Heatmiser neoStat WiFi is a 230v programmable thermostat featuring illuminated touch keys and WiFi connection. The neoStat WiFi can be configured to work as a programmable thermostat or as a timer- so if you want to take control of your towel rails, or lighting - neoStat WiFi offers you this and more!
When connected to your home broadband router, you can control your heating from anywhere - no hub required.
Unlimited neoStat WiFi can be paired to the neoApp, offering smart control of your entire home.
Features:
- WiFi 802.11b, 802.11g, 802.11n
- Works with HomeKit, Google Home, IFTTT and Alexa
- 13 Month Enhanced History Support (Displays when your home is Heating, Preheating along with set and actual temperatures)
- White Back light with Proximity sensor (White Model only)
- Back Light Dimming Function (Carbon Black Model only)
- Illuminated soft touch keys with Proximity sensor
- User Selectable Operating Mode: 1) Non Programmable 2) Weekday/Weekend 3) All days different. 4) All days the same
- 5 Minute Program Intervals
- 0.5C Set Temp (eg 20.5C)
- Self Learning Optimum Start
- 4 Comfort Levels per Day (Option for 6 when paired to the neoApp)
- Temperature Hold Facility
- Holiday Facility
- Flush Mounting
- C/F Selectable
- Key Code Facility
- Frost Protection
- Compatible with 10K, 12K, 15K NTC Floor Probes
- 3A - Volt Free Switching
NeoAir
The Heatmiser neoAir v3 is our programmable wireless thermostat that is compatible with our RF Switch / UH8-RF and neoHub Mini Wireless Receivers.
Features:
- Battery Powered
- Heating Mode, Hot Water, Heating & Hot Water Mode
- Stunning design
- Remote Sensing Option
- User Selectable Operating Mode: 1) Non Programmable 2) Weekday/Weekend 3) All days different. 4) All days the same
- 5 Minute Program Intervals
- 0.5C Set Temp (eg 20.5C)
- Self Learning Optimum Start
- 4 Comfort Levels per Day
- Temperature Hold Facility
- Holiday Facility
- Automatic White Back Light
- Surface Mounting
- C/F Selectable
- Key Code Facility
- Frost Protection
Important
Please note there is no receiver included with this product. If you require a receiver, please select one from the option available above.
RF Switch - 2 Channel receiver
UH8-RF zone Wireless wiring centre
The Heatmiser neoStat-e v2 is our Electric Floor Heating Thermostat, offering you a smarter way to control your electric floor heating. When paired to a neoHub, (sold separately) you can control your electric floor heating from anywhere! The neoStat-e v2 can be configured to work as a thermostat or as a timer - so if you want to take control of your towel rails, or lighting - Neo offers you this and more!
The neoStat-e v2 is supplied with a 3 meter remote floor sensor and is capable of switching up to 16A and communicates with the neoHub via wireless Mesh technology, greatly improving the network range when compared with traditional RF systems.
Wireless Air Sensor & Door Contact Function - neoHub required
When paired to the neoHub, you can use the wireless air sensor to measure the temperate remotely from the neoStat-e v2 or to take an average temperature in a larger room. You can also have the heating turn off whenever a window or door is opened with the use of the door contact switch.
Features:
- Stunning design
- White Back light with Proximity sensor
- Illuminated soft touch keys with Proximity sensor
- User Selectable Operating Mode: 1) Non Programmable 2) Weekday/Weekend 3) All days different. 4) All days the same
- Air, Air & Floor, Floor Only Sensing Modes
- 3 Meter Remote Floor Sensor
- Compatible with 10K, 12K, 15K NTC Floor Probes
- 5 Minute Program Intervals
- Self Learning Optimum Start
- 4 Comfort Levels / Times per Day (Option for 6 when paired to neoHub)
- Holiday Facility
- Flush Mounting
- C/F Selectable
- Key Code Facility
- Frost Protection
The Heatmiser neoStat-hw V2 is our hot water programmer with changeover contacts, making it ideal for standard and mid position valve systems.
When paired to the neoHub (sold separately) you can control your hot water from anywhere.
The neoStat-hw v2 communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating and hot water system.
Simple installation is key with Neo. The neoStat-hw v2 has been designed to replace an existing three wire thermostat, and after joining the zone to the neoHub, remote control is possible.
Features:
- Stunning design incorporating Illuminated soft touch keys
- 5/2 Day, 7 Day and 24 Hour Programming
- 5 Minute Program Intervals
- 4 Times per Day
- Easy Hot Water Boost Feature
- Automatic White Back Light (Turns off after 30 seconds)
- Flush Mounting
- Key Code Facility
- Frost Protection
UH4
The Heatmiser UH4 can be used in conjunction with our mains voltage thermostats.
The UH4 is also ideally suited for underfloor heating but can also control a single zone of radiators.
- The UH4 provides central switching of up to 4 zone actuators
- Output for a hot water cylinder and the system boiler and pump.
- UH4 Dimensions 384x148x60mm
UH6
The Heatmiser UH6 is our 6 Zone underfloor heating wiring centre designed to work with our 230v Thermostats.
The UH6 wiring centre provides central switching and is therefore ideally situated next to the underfloor heating manifold. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.
Heat & UFH Pump Delay
When there’s a demand it is possible to set a timed delay, before activating the Pump & Heat* outputs
Creepage Function
During hot weather the heating may not be required as often, which means after long periods of the UFH pump not being used, the pump can seize and refuse to operate.
To prevent this, it is good practice to operate the pump once a day, the creepage function does this for you. Once enabled the UH6 wiring centre will operate the pump for 1 minute, only if the outputs have not been operated by a thermostat, within the preceding 24 hours. This function does not operate the HEAT output.
Up to 4 actuators can be connected to each zone.
- Central wiring for up to 6 zones
- DIN Rail Mounting Option (DIN Rail not included)
- Output for underfloor heating valve and pump activated when any thermostat calls for heat
- Actuator outputs: 230v
- Dimensions (LxHxD) 265x95mm
UH8
The Heatmiser UH8 underfloor heating wiring centre is designed to work with our 4 channel 230v time clock (TM4) and 230v Set back thermostat (DS-SB) but equally could be used with any 230v room thermostat.
Up to 8 zones can be controlled from the UH8. On board the UH8 are two heating time channels, each zone allows you to specify which time channel it should follow. 2 additional time channel connections are provided for hot water control or other auxiliary devices. On demand from any zone, a 230v output is provided to switch the relevant zone actuator, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.
A simple slide switch makes zone 8 suitable for controlling a radiator zone. When used for controlling radiators, zone 8 does not enable the underfloor heating pump, valve and boiler. Up to 4 actuators can be connected to each zone.
Dimensions (LxHxD) 384x148x60mm
UH8-RF
The Heatmiser UH8-RF v2 is our 8 Zone wireless wiring centre designed to work with our Slimline-RF and neoAir Thermostats.
The UH8-RF v2 provides central switching and is therefore ideally situated next to the underfloor heating manifold. 8 zones can be controlled as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. The boiler signal can also be sent via RF to the RF Switch, providing the installer a totally wireless solution.
Up to 6 actuators can be connected to each zone. An external aerial is available for use when the UH8-RF is being mounted in a metal cupboard or when the wireless signal is restricted.
A software option in the thermostat allows you to configure which zones are underfloor heating and which zones are radiators. Radiator zones will not enable the underfloor heating pump, valve and boiler when there is a call for heat. Radiator zones should enable the boiler from the end switch of the valve.
- Central wiring for up to 8 zones
- DIN Rail Mounting Option (DIN Rail not included)
- Output for underfloor heating valve and pump activated when any thermostat calls for heat
- Wireless Fail Safe Function
- Wireless Boiler Link (RF Switch Optional)
- Works with our Slimline-RF and neoAir)
- Output for multiple radiator zones
- Output for domestic hot water
- Actuator outputs: 230v
- Dimensions (LxHxD) 384x148x60mm
NeoHub
Heatmiser neoHub G2 is the gateway to the Neo System, providing remote control of all neoStat's and neoPlug's from your iOS or Android device.
The Heatmiser neoHub G2 connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere.
Key Features
- NeoHub G2 creates a Mesh Network to the powered Neo devices, greatly increasing the network range in your home.
- Smart Profiles - Allow you to program time and temperature settings and then apply them to a number of zones. Any subsequent change to the profile will be automatically applied to those zones using the profile.
- Geo Location: Automatically turn the heating off when you leave home and back on when you return.
- Compatible with up-to 32 Neo devices.
- Works with HomeKit, Google Home, Alexa, IFTTT.
- Automatic Firmware updates for neoHub G2 and connected devices.
- Clock Sync and BST correction - UK/CET and NZ Time Zones.
Push Notifications
Push notifications are short messages that are sent directly to your phone based on a condition in your neoApp, such as high or low temperature, door open or low battery warning.
High/Low temperature Alert: When the temperature in your home reaches your high or low temperature limit you will receive a push notification on your device. This will inform you of the location and device that triggered the alert.
Window Open: If you have installed any Heatmiser Door/Window contact switches, you can select to receive a push notification whenever a door/window is opened. The push notification will re-trigger whenever the window or door is reopened. The notification will inform you of the location and device that triggered the alert.
Low Battery: If you have any neoAir, wireless sensors or window/door contact switches installed, you can select to receive a push notification whenever the device requires new batteries. The push notification will be sent every 48 hours until the low battery warning is cleared. This will inform you of the location and device that triggered the alert.
Compatibility
- Mobile apps: iOS 13+ iPhone/iPad | Android 8+ device
- Smart Home: HomeKit, Google Home, Alexa, IFTTT
Included Accessories
- UK/EU Power Adaptor
- 1m Ethernet Cable