The VOLUME LIFT lash lamination composition # 1 is used in the first stage of lash lamination. It does not contain thioglycolic acid. The active component of the first stage is cysteamine.
The VOLUME FIXER eyelash lamination composition # 2 is used in the second stage of eyelash lamination. It does not contain hydrogen peroxide. The active ingredient is sodium bromate.
Composition # 3 for lash lamination NOURISHING ESSENCE is the final stage of lash lamination. Wraps around each lash and fixes the curl.
Kit package:
Composition # 1 for lash lamination VOLUME LIFT IC FACTORY, 5 mL;
Composition # 2 for lash lamination VOLUME FIXER IC FACTORY IC FACTORY, 5 mL;
Composition # 3 for lash lamination NOURISHING ESSENCE IC FACTORY, 5 mL;
FIXING GLUE, 5 mL;
Ultra Soft silicone rollers size "S" IC FACTORY, 1 pair;
Ultra Soft silicone rollers, size "M" IC FACTORY, 1 pair;
Ultra Soft silicone rollers, size "L" IC FACTORY, 1 pair;
Instruction.
Mode of application:
Remove makeup with an oil-free means. Using a special liquid (degreaser / primer) and a micro-brush to degrease eyelashes. Then glue the lower eyelashes with a ribbon for eyelashes.
Before applying the silicone rollers, try them on your lashes. They come in three sizes: S - small, M - medium, L - large.
When the silicone roller is fixed on the eyelid, apply a small amount of glue to the eyelashes on its surface.
Evenly apply the required amount of the Composition No. 1 using a microbrush, departing from the root of the eyelashes at a distance of about 2 mm.
The exposure time of the Composition No. 1 is approximately 8-13 minutes. For the effectiveness of this stage, it is necessary to cover the eyes with a cling film, then apply hot cotton pads to the film to create a “bath” effect. Then we remove the Composition No. 1 from the eyelashes and from the silicone rollers with a dry cotton swab.
Then using a microbrush evenly applied to the eyelashes Composition number 2 for 8 - 13 minutes. It is important to note that Composition No. 2 is applied to the same zones of the eyelashes as Composition No. 1.
After exposure, carefully remove from the eyelashes and rollers. Composition No. 2 with a dry cotton swab.
In conclusion, we clean the skin from the remnants of the compositions with the same Klins. After that, apply the Composition No. 3 for lamination on the lashes and give dry for a couple of minutes. The composition is not washed off and not removed from the eyelashes. The procedure is complete!
Rules of the first day after the procedure and additional instructions for the client:
1. During the first two hours after the procedure, the client should not allow the eyelashes to come into contact with water.
2. Within 24 hours after the procedure it is necessary to prevent the eyelashes from contact with hot water or steam. Also, the first 24 hours should not swim and exercise, contributing
sweating.