Nk10 Smartwatch 1.32in Large Touchscreen compatible with both IOS 9 and ANDROID 5 and newer
• Bracelet function description
short press once on the dial page to enter the main menu, double-click on the main menu page to switch styles, and short press on other pages to retur to the previous level
Press and hold for 2 seconds to turn on and off the machine, short press on any page to return to the dial, and short press on the dial page to turn off the screen.
Standby page: swipe down to enter the information page, swipe up to enter the control center interface; swipe left and right to switch dials.
• control center
⚫ Airplane Mode: On the Control Center page, turn on Airplane Mode, and
the Bluetooth function will be turned off.
⚫ Do Not Disturb Mode: Turn on the Do Not Disturb mode function, and the bracelet will stop receiving notification messages, so as not to be
disturbed by reminder messages.
• health tricycle
0 Number of steps (the outermost ring): The total number of steps every
day, reset overnight, and the number of steps can be set on the APP. Exercise (intermediate ring): The data comes from any exercise under exercise, and it is reset overnight. (As long as it is entered into the exercise, any exercise time can be accumulated) The exercise target can be set on the APP. • Standing (innermost ring): Data source (if the number of steps in an hour
is more than 20 consecutive steps, a standing will be displayed), reset overnight, and can be set on the standing target APP. The second page shows the goals and proportions of the three rings of health. Histogram: Figure Steps: Distribution of steps per hour from 0:00 to 23:00 in a day.
Figure 2 Exercise: hourly exercise duration distribution from 0:00
to 23:00 in a day. Figure 3 Standing: Hourly distribution of standing from 0:00 to 23:00 in a day.
Below the graph there is also a display showing total distance and total calories.
• Workout:
There are 7 types of running, cycling, strength training, basketball, tennis,
volleyball, and football.
1. Running: exercise time, calories, steps, distance, heart rate;
2 Cycling exercise time, calories, distance, heart rate; 3. Strength training: exercise time, calories, heart rate;
4. Basketball: exercise time, steps, calories, distance, heart rate; 5. Tennis: exercise time, steps, calories, distance, heart rate;
6. Volleyball: exercise time, steps, calories, distance, heart rate; 7. Football: exercise time, steps, calories, distance, heart rate;
A:Pause and resume function for each sport
to be saved locally
D.The heart rate is measured at the beginning of the exercise and is
automatically measured every 5 minutes during the exercise.
B. After stopping the exercise, the exercise data of this project does not need C: Music control: You can control the music playback, pause, previous and next functions during exercise.
• Heart rate /blood pressure/blood oxygen/electrocardiogram
After entering the measurement interface and waiting for a few seconds, the current test result will be displayed. This feature requires the bracelet to support a heart rate sensor.
• Dial
The dial pad can make calls (note: the phone also needs to be connected to the audio)
• phone book
Add 8 common contacts in the APP. After the Bluetooth connection between the bracelet and the APP is successful, the contacts can be synchronized to the phone book of the bracelet and displayed. Click the contact to make a call those the mobile phone also needs to be connected to the audio)
• music control
The bracelet can control to switch the previous song, the next song. pause/start playback. (Note: The use of this feature phone requires an audio
connection)
• style switch
can switch between different styles of the main menu in the options.
• voice assistant
Pull down the standby page to enter the shortcut interface, click the voice assistant menu to start the language assistant. (Note: The mobile phone needs to be connected to the Well Audio device at the same time, and the user's voice needs to be set in advance in the voice menu on the smartphone side)
• information mode
connected to the APP, if the push notification reminder is enabled, when the bracelet pushes multiple reminder messages, you can enter this interface to view the latest message records.
• Stopwatch function
Enter the stopwatch and click the start button to start timing, click the pause button to stop, and click the reset button to clear the timing.
• weather
Connect to the app and enter this interface to view the weather conditions of the day
• find a phone
APP is connected, click "Find Phone" on the bracelet and the phone will emit a prompt tone
• QR code
Scan the QR code with your mobile phone to download the APP
• sleep mode
The latest 7-day records are displayed locally on the sleep details page, and the sleep data details can be viewed by connecting to the APP
Note: Only when the app is connected and the bracelet is worn to sleep will the sleep data be uploaded to the app and the detection will start at 10 pm.
• Photograph
connected to the app, start the camera from the bracelet or enter the remote camera interface from the APP, shake/turn the wrist/touch the bracelet, and automatically take a photo after a countdown of 3 seconds. Please allow the APP to access the album to save the self-portrait photo.
• Reset
Resetting this function will clear all data on the bracelet. (like step counting)
• More
• Siri: Tap the voice assistant menu to launch the language assistant
**Important**
(Note: The mobile phone needs to be connected to the audio at the same time, and the user's voice needs to be set in advance in the voice menu
on the smartphone side)
• About You can view information about the machine.
• Language You can set any language in the options. Set Date: You can set the date required by the user.
• Set time: You can set the time required by the user
• Backlight time: There are multiple options on the backlight time setting page. When the corresponding time is selected, the screen will automatically turn off.
• Return to the dial: There are multiple options for returning to the dial setting page. After the disk is extinguished, the timer starts. When the corresponding time is selected, it will return to the dial
• APP functions and settings Personal information
entering the APP, please set your personal information first Settings-Personal Information, you can set gender-age- height-weight-distance
You can also set your daily goal step count and monitor your daily
progress.
• App push
In the connected state, if this function is turned on, when there are messages such as WeChat, QQ. Facebook, etc., the bracelet will vibrate to remind, and display the content received by the app (you can also enter the information menu of the bracelet to view the latest message records). (You need to give the APP permission to get system notifications).
Tips for Android users
When using the reminder function, it needs to be set to allow" Fripro" to run in the background, it is recommended to add " Fripro" as trust in the permission management and open all
permissions
• Alarm setting
In the connected state, you can set 8 alarm clocks. After setting, they will be synchronized to the bracelet. It supports offline alarm clocks. After the synchronization is successful, even if the APP is not connected, the bracelet will remind you at the set time.
• Find the bracelet
In the connected state, click the "Find the bracelet" option, and the bracelet will vibrate
• custom watch face
You need to connect to the APP to get the dial settings, and you can choose the recommended dial/album custom dial to sync to the bracelet.
• Sedentary reminder
Set whether to enable the sedentary reminder function. You can set the reminder time interval. If you sit for a long time within the set time, the bracelet will remind you
• Raise your hand to brighten the screen
When this function is turned on, when the screen of the bracelet is off, lift your wrist and tum the screen towards you to light up the screen.
• Device reset
Setting reset this function will clear all data of the bracelet (such as step
counting)
• Remove Device
Remove Device This feature will clear data and remove the device