10mm Livestock Feed Pellet Mill Machine 220V 4.5kw

The machine can be equipped with different die hole diameter ring die according to user requirements, used to produce different specifications of pellet feed, to meet different feeding objects. If you need extra plates welcome to contact us.

We supply all variety other size plates:  2mm,  3mm, 4mm, 5mm, 6mm, 8mm, 10mm,12mm

Output 440lb per hour.

Precautions:

1.When using, it should be noted that there should be no foreign matter such as stones and iron blocks in the raw materials. After the pellet machine has been working continuously for more than ten shifts, the pressure roller oil hole, the universal joint oil hole, and the linkage shaft oil hole need to be filled with high-temperature lubricating grease to make the pressure roller Good working performance and extended bearing life.
 
2.During granulation, it is strictly forbidden for the pressure roller to contact with the template to run idly, and the continuous feeding can not be interrupted.  At the same time, the pressure roller shaft nut is locked to avoid loosening and damaging the spindle keyway.
 
3.When granulating, there is no granulation, no discharge, the template should be removed, and after opening one by one, some fiber feed can be added appropriately to restart the granulation.
 
4.Always check the tightness of the screws in each part of the machine. If there is oil leakage in the gearbox, replace the oil seals in time, and check whether the bearings in the machine head are short of oil.
 
5.When the pellet machine is working, do not reach into the feeding port with your hands. If necessary, use wooden sticks to help feed the pellets.
 
6.Before turning on the machine, it is necessary to add less material before turning on the
machine. When shutting down, leave a small amount of feed in the machine to prevent the press roller of the machine from contacting the template from idling.
 
7.If the machine is stuck in operation, stop it immediately, press the pressure roller until the bolt is flat, and then restart the machine.
 
8.Each time the work is completed, the adjusting pressure roller bolts must be loosened.
 
 

Three roller will supply high 220kg/h output. They are ware-resistant and durable. There are three nuts on top, they are used to adjust the pressure between the disc and roller, then reach to different degree of compaction.

 It is recommended to add high-quality machine oil or hyperbola heavy-duty gear oil.
 

1 set 10mm Pellet Mill Feeding Machine 220V  ---239227