EATON AEROQUIP PTFE Hose Assembly: 3/16 in Hose Inside Dia., 4 ft Hose Lg
Hose Inside Dia.
3/16 in
Hose Outside Dia.
5/16 in
Hose Length
4 ft
Hose Tube Material
PTFE
Hose Cover Material
301 Stainless Steel
Max. Working Pressure @ 70 F
3,000 psi
Safety Factor
4:1
Temp. Range
-65° to 450°F
Standards
FDA 41; SAE100R14
Bend Radius
2 in
Hose Fitting A Size
7/16 in
Hose Fitting B Size
7/16 in
Hose Fitting A Material
301 Stainless Steel
Hose Fitting B Material
301 Stainless Steel
Hose Fitting A Type
FJIC
Hose Fitting B Type
FJIC
Compatible Chemicals
Acetic Acid 20%; Acetone; Adhesives; Air; Antifreeze (Coolant); Automatic Transmission Fluid; Brake Fluid; Carbon Dioxide; Chromic Acid 10%; Chromic Acid 5%; Citric Acid 50%; Diesel Fuel; Ethyl (Ethanol); Ethylene Glycol; Fertilizers; Formic Acid; Fresh Water; Fuel Oil; Gasoline; Hydraulic Fluid (Petroleum); Hydraulic Fluid (Synthetic); Hydrofluoric Acid (20%); Hydrofluoric Acid (75%); Hydrofluoric Acid 100%; Hydrogen Peroxide; Isopropyl (Isopropanol); Lithium Grease; Lubricated Air; Methyl (Methanol); Methyl Chloride; Methyl Ethyl Ketone (MEK); Mineral Oil ; Motor Oil; Naphtha; Nitric Acid (10% Solution); Nitric Acid (20% Solution); Nitric Acid (50% Solution); Nitric Acid (Concentrated Solution); Paint; Paint Thinner; Salt Water; Sodium Bisulfate; Sodium Bisulfite; Solvents; Steam; Toluene; Turpentine; Vegetable Oil; Windshield Washer Fluid; Xylene
Not Recommended Chemicals
Automatic Transmission Fluid; Biodiesel; Brake Fluid; Diesel Fuel; E85; Fuel Oil; Gasoline; Heptane; Hexane; Hydraulic Fluid (Petroleum); Hydraulic Fluid (Synthetic); Kerosene; Lacquer Thinners; Lubricated Air; Methyl Chloride; Mineral Oil ; Motor Oil; Naphtha; Paint; Sodium Hydroxide/Caustic Soda (20%); Sodium Hydroxide/Caustic Soda (50%); Sodium Hydroxide/Caustic Soda (80%); Sodium Hypochlorite/Bleach (to 20%); Solvents; Steam; Stoddard Solvent (Mineral Spirits); Sulfuric Acid (10% - 75%); Sulfuric Acid (75% - 100%); Toluene; Trichlorethylene (50%); Turpentine; Vegetable Oil; Xylene
Brand
EATON AEROQUIP
UNSPSC
40142007
Country of Origin
USA (subject to change)
Product Description

These PTFE (polytetrafluoroethylene) chemical hose assemblies are used in the cosmetics, pharmaceutical, chemical, and food industries. They comply with FDA requirements for use with food products. These hoses have female JIC (Joint Industrial Committee) fittings on their ends. JIC fittings have straight threads and a 37° flare seat that create a tight seal when connected to compatible equipment. The hoses' PTFE tube provides excellent temperature and chemical resistance and maintains its integrity after exposure to thermocycling processes. The PTFE tube also has a low coefficient of friction to maintain high flow rates and provide easy cleaning. The hoses' EPDM (ethylene propylene diene monomer) cover provides excellent resistance to ozone and abrasion and offers good resistance to heat and chemicals.