Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2.
Dismount the tire: Clamp the tire onto the tire changer, and adjust the
valve at 1 o’clock relative to the tire separation head. Insert the
tire tool and lift the tire bead onto the mounting head to discount the
head.
3.
Dismount the sensor: With a screwdriver remove the fastening screw and
sensor from the Valve stem, then loosen the nut and remove the valve.
4.
Mount sensor and valve: Slide the valve stem through the valve hole of
the rim. Tighten the screw-nut with 4.0 Nm with the help of the
positioning pin. Assemble the sensor body against the rim and tighten
the screw.
5.
Mount the tire: Place the tire on the rim, making sure that the valve
faces the separation head at an angle of 180 degrees. Mount the tire
over the rim.