10x 5m N male to RP-SMA male coaxial cables, 0.400" diameter 

This cable is a direct replacement for RG-8, LMR-400 (a trademark of Times Microwave), and other 0.400" / 10mm jacketed low-loss coaxial cables. Please note this cable is very stiff, and intended for permanent installations. You will need appropriate cable support or clips. Installation note: It's critical that all outdoor connectors are taped with self-amalgamating tape (not electrical tape)! Water will seep through screw threads over time, and will permeate your cable and antenna via the exposed connectors, causing performance to mysteriously drop some days or weeks after installation. Connector A N-male Connector B RP-SMA male Length 5m Insertion loss ?0.193dB per metre @ 868Mhz; ?0.132dB per metre @ 433Mhz Impedance 50 Ohm Capacitance 79pF +/- 2pF per metre Velocity of propagation 0.82 Conductor Copper-clad aluminium, 2.74mm Shield Aluminium foil + braiding Dialectric isolation >3000V Dialectric Foam PE Jacket PE Working temperature -40? to +85? Minimum bend radius 103mm Diameter 0.405" or 10.3mm Please note that this cable is quite stiff, and should not be bent repeatedly or installed in a location where it can move (eg, unsecured and in the wind) as the central conductor will be damaged. Do not bend tighter than the outside of a frisbee (103mm is the minimum bend radius), or kink. Secure cable to a solid object every 500mm, and wrap all connections in self-amalgamating tape.