Description:
Add functional lighting to the rear of your Touring bike. These running, directional and brake lights command the attention of following vehicles.

Feature
Chrome Housing/Red Lens
Bright, fast-acting LED lamps glow red when the ignition is on, and intensify when the turn signals or brakes are activated
Lamps act as a supplement to the Tour-Pak mounted rear lighting, and also permit the removal of the Tour-Pak with a Detachable Mounting Kit
Housed in a low-profile chrome frame that is contoured to hug the curve of the hard saddlebags
Self-adhesive lamps fit seamlessly beneath the saddlebag lid and add a stylish touch of color, even when the bike is parked

Fitment
Fits For Harley Davidson 14-later Touring models, FLHTCU, FLHTCUL, FLHTK, FLHTKL, FLTRU and 16-later FLHTKSE and FLTRUSE models with hard saddlebags.



Package includes
2x Lamps
1x modulator & quick-disconnect wiring harness

Installation Instruction:
Step 1: Unplug the existing connector and plug the control box into the two ends of the connector you just unplugged - then run the long ones out to the bags
Step 2: Before you zip-tie them in place, check your turn signals to make sure you have the right & left sides correct
Step 3: Ran the wires out to just behind the shocks and then up and over into the bags (with the connector for each light inside the bags)
Step 4: Please use alcohol to rubbing to make sure your bags are clean before sticking the lights on
Step 5: Peel a small part of the red stuff off the double-sided tape first. Hold them in place and peel the rest from underneath (while still holding in place). Press firmly to make sure it's stuck tight

ibay365

Datacaciques