Document
Features
  • Input Voltage: DC12V-24V
  • The wireless RF signal can pass through walls, floors and doors.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance;
  • It is a learning code wireless remote control switch (receiver), the output way / working way can be changed as you like, and it is easy to match the transmitter.
  • Widely Used: Home appliances switch, lighting switch, wireless control products, switches, intelligent switches and other electronic equipment
Specification
Receiver
Input Voltage DC12V-24V Output Type Passive output (12V)
Coding Way Intelligent Learning Standby Current ≤15mA
Working Frequency 433MHz Max. Loads ≤10A
Receive Sensitivity ≥-105dBm Working Temperature -20℃- 70℃ / -4℉~158℉
Receiver Size Approx. 6-11/16"x3-25/64"x11/16" (170x 86x 17.3mm) Attention Mount case not included
Transmitter
Operating Voltage 12V Operating Frequency 433MHz
Vibration Resistance 4.7M Chip Type 2264
Modulation ASK (Stable, less interference) Encode Type Welding code
Battery Type 12V 23A(Included) Remote Distance 500m (Theoretical value)
Ambient TEMP -30℃ -70℃, Humidity<95% Product DIM 5-3/16"x2-3/32"x39/64" (131.7x53x15.3mm)
Working Mode Switching
  • 1) Monmentary: Press the learn button on the receiver for 3 seconds, the buzzer beeps once. Then press button “1” on the transmitter, the buzzer beeps again. The working mode of all channels is set to Momentary. (Default)
  • 2) Latched: Press the learn button on the receiver for 3 seconds, the buzzer beeps once. Then press button “2” on the transmitter, the buzzer beeps again. The working mode of all channels is set to Latched.
  • 3) Toggle: Press the learn button on the receiver for 3 seconds, the buzzer beeps once. Then press button “3” on the transmitter, the buzzer beeps again. The working mode of all channels is set to Toggle.
  • 4) 1CH-9CH is Momentary and 10CH-18CH is Toggle: Press the learn button on the receiver for 3 seconds, the buzzer beeps once. Then press button “4” on the transmitter, the buzzer beeps again. The working mode of 1CH to 9CH is set to Momentary, and 10CH to 18CH is set to Toggle.
  • 5) 1CH-9CH is Momentary and 10CH-18CH is Latched: Press the learn button on the receiver for 3 seconds, the buzzer beeps once. Then press button “5” on the transmitter, the buzzer beeps again. The working mode of 1CH to 9CH is set to Momentary, and 10CH to 18CH is set to Latched.
  • 6) 1CH-9CH is Latched and 10CH-18CH is Toggle: Press the learn button on the receiver for 3 seconds, the buzzer beeps once. Then press button “6” on the transmitter, the buzzer beeps again. The working mode of 1CH to 9CH is set to Latched, and 10CH to 18CH is set to Toggle.
Pairing & Unpairing
  • Pairing: Press the learn button on the receiver, the buzzer beeps. Release the learn button and press the button on the transmitter which needs to be paired about 2 seconds. The buzzer beeps 8 times and stops to indicate the pairing is successful.
  • Unpairing: Press and hold the learn button on the receiver, the buzzer beeps until it stops. It indicates the unpairing is successful.
Package
  • 1 x Transmitter
  • 1 x Receiver
  • 1 x English Manual