Hose End Fitting Gates G25123-0812.

PART AND FITMENT DETAILS

Brand: Gates

Part Number: G25123-0812

Item Condition: New

Quantity Needed: 1

Item Specifics:

Description

<p>Gates MegaCrimp couplings are designed for use with Gates wire braid hydraulic hose to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented C insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal.</p><p>One MegaCrimp coupling size can accommodate various one and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.</p><ul><li>Robust bite-the-wire crimp</li><li>Low profile</li><li>Full-stem insertion</li><li>Full-length crimp</li><li>Tested to industry-leading 600,000 impulse cycles</li><li>Simplifies inventory management</li><li>Environmentally-friendly TuffCoat plating for 345 percent better corrosion resistance than SAE standard</li></ul><p> Not to be used as a live swivel. Internal O-rings rated at +250 Deg. F (+121 Deg. C). SAE J1926/3 ISO 11926-3 Light-Duty (L Series) Stud End.</p><p><b>Gates - Driven By Possibility</b></p>

Marketing Description

Gates MegaCrimp couplings are designed for use with Gates wire braid hydraulic hose to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented C insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal.

One MegaCrimp coupling size can accommodate various one and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.

Robust bite-the-wire crimp

Low profile

Full-stem insertion

Full-length crimp

Tested to industry-leading 600,000 impulse cycles

Simplifies inventory management

Environmentally-friendly TuffCoat plating for 345 percent better corrosion resistance than SAE standard

Not to be used as a live swivel. Internal O-rings rated at +250 Deg. F (+121 Deg. C). SAE J1926/3 ISO 11926-3 Light-Duty (L Series) Stud End.

Gates - Driven By Possibility

Hose Recommendation

Can Accommodate Various Hose Outside Diameters on Both One-Wire & Two-Wire Braid Hydraulic Hose

Coupling Description

MegaCrimp Male O-Ring Boss Swivel - 90 Block

Industrial Description

8G-12MBX90BL

Thread Size

1 1/16-12

Hose Inside Diameter

.5 IN

Nut Hex (in) - H2

1.3125

Drop (in) - T

2.09

Drop (mm) - T

53.1

Cut Off (in) - C

1.07

Cut Off (mm) - C

27.2

Length (in) - L

2.52

Length (mm) - L

64.1

Seal Type

O-Ring

O-Ring Location

Outside O-Ring Boss

Gender

Male

Bent Tube Angle

90 Block

Swivel

Yes

See Item Specifics section for additional specifications about this part.

Interchange Part Numbers

This item may interchange to the following part numbers from other brands. This is provided for reference only and does not guarantee that the part your are buying is identical to the part numbers from the brands listed below. To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table.

Brands: NAPA - OTC, NAPA, NAPA/DORMAN NAPA XPRESS - XDK, NAPA/RIGHT FIT - RFP, NAPA/SERVICE TOOLS-SER

Part Numbers: G25123-0812

SE3-A