Description:
The
machine is used to weld plastic of PVC.PE.DHPE.LDPE.EVA,PP and other
plastic materials that can be hot melted;
For the current status of
format printing industry Huge screen picture requires to be printed
separately and then welded.Side of the picture need to be flapped These
efforts need pvc welding machine invevitably
The traditional Methods is
using glue such as 502, but the disadvantages are obviously:
1. The
cost is very high.A medium-sized printing company costs are up on thousands
of dollars of glue one year and welding staff’s wages is a very high
expenditure
2. The
speed is very low.Especially in winter,the temperature is low,and it
causes/lead to low welding effiency
3. Working
environment is bad.Glue is not only smells bad,but also is left on the
hands and clothing of staff
4. The
effect is very bad.Welding with glue pvc is easier blistering and wrinkled
after shinning of sunlight
The welding machine has
great advantages in welding PVC.It costs
only about 1.5 degrees per hour and can weld 8-15 meters per minute .It
need only one staff to operate.It’s welding effects is very good because of
using the hot-melt lamination theory.Splicing can
be rolled up after 20
seconds, so it save space.The speed and
temperature is adjustable according to thickness of PVC .It can be
adapted to different types of materials.
The weight of welding machine is
only 14 kg and (the)volume is small.It is the perfect partner for fornat
Inkjet Printer
Parameter:
|
Rated voltage |
AC220V |
|
Frequency |
50Hz |
|
Power |
800-1600w |
|
Temperature range |
0-500℃ |
|
Speed scope |
1-10m/min |
|
Specifications |
41*25*20cm |
|
Welding width |
2-5cm |
|
Weight |
13kg |
Applications:
It is widely used to weld
advertising inkjet fabric,inkjet cloth,light box cloth,Daogua cloth,mesh
cloth,tarpaulin and other PVC,PE,DHPE,LDPE,EVA,Pp plastic materials that
can be hot melted
Characterics:
1：welding
without glue.It replaces the 502 glue and improves the working environment
of workers, improve efficiency and quality of welding.It is a low-carbon
and environmentally product, it is the inevitable trend of development in
the future.
2：The
theory is based on digital control constant temperature。It
is equipped with temperature feedback sensor.The sensor can always
monitoring the temperature of the outlet to keep a constant temperature.It
uses advanced PID control technology, and adjust the power to make the
temperature more constant automatically，the
fluctuation is within 5 degrees.It makes welding more uniform.It uses
zero-crossing trigger control IC, there is no harmonic interference, so no
matter how long the picture is , the mosaic effect will not change.While
other similar products in home have many disadvantages.That ones manually
adjust the firing angle with the analog control knob, harmonic interference
is relatively large and leads to temperature instability.They show the
temperature and the output voltage are not reflect the true temperature in
fact.Their actual temperature changes with the input of the voltage
fluctuated, is not constant, and sometimes above the temperature difference
of up to ± 50 ℃.So
they are cheap but the quality is poor.
3: speed ：6-10m
per minute.you can ajust the speed according to setting temperature and the
thickness of picture.
4: Temperature scope：0-500℃。Temperature
can be setted with ▲ ▼ buttons
according to the thickness of picture.
5：R
& D capacity:Our company has all the key technology, the quality of the
machineis//is in control.
6：power:1000-1600W(After
Setting the desired temperature, it will automatically adjust the power
according to the temperature).
7：Hot
air speed of hot air gun .50-100% of the wind speed can be adjusted, so you
can fight a thick picture to ensure easier,and the heater parts live
longer.
8：Heater:Equiped
with AC motorand it makes wind stronger, life longer (more than 2000
hours), and cost is low because you only need to replace the carbon brush.
9：Heating
wire:The quality of imported heating wire is more reliable and longevity.
10：POWER:DELL
Original Laptop Power，EMC is
Good and quality is reliable that meet with European and American
standards.
Operation
steps:
1：First,
make the picture smooth and tight,take jointer to accurate （about
2-4cm）, fixed edges with tape
or glue on the ground.
2：Open
the power, turning handle to left to keep hot air nozzle and the rubber tire
is on the straight line.Then turn the right black knob to adjust the
speed, generally marked on the knob points to the location between 2 from
4.After setup, turning the handle to right until the hot air out of the
ground.
3：Set
the temperature degree.Open temperature switch,And turn the golden knob
untill it clicks and then follow the button to the end.▲for
up ▼for down ,set the desired temperature according
to thickness of picture。In general, the temperature
is between 300-350℃，Or taking
some picture material to aligned nozzle, If it can be melttde immediately,
This temperature is the one you need and to set.
4：In
the welding process，if printing material is burnt,
the first thing to slow down the speed or low the temperature，This
can avoid to burnt picture material，but do not
increase speed rapidly, otherwise the machine will run too fast to make
it go straightly，this will
cause the picture can not be spliced and damage the picture.
5：Before
using ,please find the proper temperature and speed according to your
printing material. If The speed is too slow it could burn the picture
,while too fast to welding strong.Therefore,It is very important that the
temperature and speed are good match.
6：After
welding ，turning the handle to right to keep hot air
gun from picture competly，then turn off the
temperature switch(Left the gold knob untill it make a voice of clicks)。No
luging the power cord and turning the power off directly，to
avoid heat damage to the hot air gun。After
temperature of the machine must be reduced to below 50 ℃,you
can plug the power or main switch.
7：Don’t
use it in rainy day，the workplace should be dry, flat
and safety of fire。The machine should have technical
person to oprate， it is forbid that someone use it
without specific knowleage. Working voltage：110V—220V.
Strictly prohibited without permission disassemble，you
should be responsible the result yourselt.
8：Warranty
period is one year， hot air and heating parts are
not covered in the warranty because they are repid-wear article，we
are only responsible for the supply of fitting but the cost is subject to
the client.
Repair and
maintenance:
|
Fault |
Remedy |
|
Temperature is garbled, the actual temperature does not show
|
Check
the temperature probe whether the grounding be kept vacant nozzle。View
probe is broken, repair the sensor line. |
|
Temperature not rise |
Check whether the fuse heating parts, heating parts
replacement if the fuse。 |
|
No power |
Check
the wiring is solid or not, protective tube burst。 |
|
Scratch
the screen |
Adjust
the nozzle and parallel ground，keep
the right lateral of wind mouth form the ground 1mm |
|
Speed
out of control
|
Replace
potentiometer (black knob) |
|
Welding
is not strong
|
Rise temperature degree or slow the speed，Adjust
the nozzle parallel with the ground。。 |