Everbuild Wet Rot Wood Hardener (Treatment) Repairs Wood Timber Permanently.

EVERBUILD WET ROT WOOD HARDENER 250ML REPAIRS DAMAGED WOOD Product Description EVERBUILD WET ROT WOOD HARDENER is a highly penetrative solution of selected resins in solvent which soaks deep into the fibers of decaying wood and dries to leave the wood hard and resistant to further moisture penetration. The resin-modified wood then becomes an ideal base for repair with EVERBUILD 2 PART HIGH PERFORMANCE WOOD FILLER. The solution is dry in 6 hours and is suitable for interior and exterior use providing a cost-effective alternative to replacing joinery affected by wet rot. Benefits Binds together damaged wood to form a solid base for filling. Reduces subsequent water penetration. Areas For Use Repairing wood damaged by wet rot (in conjunction with EVERBUILD 2 PART HIGH PERFORMANCE WOOD FILLER in both interior and exterior applications. Strengthening and reinforcing and sealing both softwood and hardwood. Surface Preparation Before applying, completely remove all decayed and crumbly wood down to a solid base. Ensure the wood is clean, reasonably dry, sound and free from dust, grease etc. Application Shake can and decant solution into a suitable container. Apply by brush until the area is completely saturated. An enhanced hardening effect may be achieved by drilling small holes in the wood to give deeper penetration. Allow drying and removing excess hardener with a wire brush. Fill areawith EVERBUILD 2 PART HIGH PERFORMANCE WOOD FILLER and sand, stain or paint as required. Cleaning: All tools should be cleaned immediately after use with cellulose thinners Specific Data Base Organic resin in acetone/solvent blend