iShoot Dual-camera Synchronous Undamped 360° Cantilever Gimbal
Tripod Crane Head IS-XB02--- Support Vertical Shooting
Suitable for 100-400/150-600 Telephoto Lens
Features:
1. The cantilever gimbal does not have a quick release plate. The measured volume is about 95mm long x 85mm wide x 115mm high. Two multi-functional clamps are used respectively. The two clamps cannot be rotated independently, but can only rotate synchronously. The clamps are compatible with ARCA -SWISS/RRS structural quick release plate, also compatible with Manfrotto 200PL/410PL structural quick release plate, as well as lens replacement foot or tripod mount ring using same standard;

2. The cantilever head has four built-in metal bearings, of which two cantilevers have a built-in metal bearing respectively; the top adopts a large locking knob, which can realize non-damping rotation;

3. The base has two built-in metal bearings, no damping design, and can rotate freely at 360°. The diameter of the bottom of the gimbal is about 60mm, and it adopts 3/8 screw holes;

4. The net weight of the entire gimbal is about 780g, and the maximum load is about 10 kg. The gimbal does not have a quick release plate, and only supports the lens tripod ring with quick release plate function. If the lens tripod ring does not have a quick release plate function, please Replace it with a tripod ring with quick release plate function, otherwise it cannot be installed and used normally;

5. The cantilever head is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.
Scope of application:
(The lens needs to have a tripod mount ring with quick release plate feature, it cannot be used without such tripod ring)

Sigma 105mm F1.4 DG HSM Art
Sigma 70-200 F2.8 DG OS HSM Sport
Sigma 100-400mm F5-6.3 DG DN OS (E-mount/L-mount)
Sigma 60-600mm F4.5-6.3 DG OS HSM Sport

Tamron SP 70-200mm F2.8 Di VC USD G2
Tamron 70-210mm F4 Di VC USD
Tamron 50-400mm F/4.5-6.3 Di III VXD
Tamron 100-400mm F4.5-6.3 Di VC USD
Tamron 150-500mm F5-6.7 Di III VC VXD
Tamron SP 150-600mm F5-6.3 Di VC USD G2

Fujifilm XF 200mm F2 R LM OIS WR
Fujifilm XF 150-600mm F5.6-8 R LM OIS WR
Package Including:
1 x iShoot Dual-camera Synchronous Cantilever Gimbal IS-XB02
(The other items in the photos not listed here are for illustrating only, not included)

iShoot Lens Collar Tripod Mount Ring IS-SM105ART
Compatible with Sigma 100-400mm F5-6.3 DG DN OS (E-mount)
& Sigma 105mm F1.4 DG HSM Art (EF/FX/FE/L-mount)
Bottom is ARCA Fit Quick Release Plate Feature
Compatible with Tripod Ball Head of ARCA-SWISS / RRS Fit
Features:
1. The lens collar is made of high-density Aviation Aluminum, lightweight and solid; precisely machined by world-class high-end CNC turning center; hollowed-out work processed by Multi-Diamond Cutter finely;

2. The Tripod mount ring surface using vibration polishing technology and multiple anodic oxidation, greatly increased the color uniformity of the metal surface; the appearance and exquisite workmanship is much better than similar products made by mold;

3. The tripod collar using laser scanning technology to accurately obtain lens parameters, and then accurately carve out the shape of the inner diameter of the tripod ring according to the data;

4. The lens support collar is designed and improved with reference to Sigma original TS-111; inner diameter is about 82mm, width is about 18mm, the inner wall has grooves and notches, and 3M plastic protective film is attached; locking knob with non-slip design;

5. The bottom quick release plate of the Lens support is about 65mm in length, adopts ARCA-SWISS / RRS 39mm standard fit, and reserved 1/4 and 3/8 screw holes, equipped with stainless steel non-slip screws, net weight about 170g;

6. Bottom quick release plate is AS standard, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.
Applicable to:
Sigma 100-400mm f/5-6.3 DG DN OS (E-mount)
Sigma 105mm f/1.4 DG HSM Art (EF/FX/FE/L-mount)
Can't be used for other lenses
Package Including:
1 x iShoot Lens Collar IS-SM105ART for Sigma 105mm F1.4 DG HSM Art & Sigma 100-400mm F5-6.3 DG DN OS
(The other items in the photos not listed here are for illustrating only, not included)