eBay

Hantek Digital Storage Oscilloscope 1GSa/S 8M DSO2C15

with US style power cord

Features:

1) 2 channels are respectively controlled by independent knobs
2) 100MHZ or 150MHZ analog channel bandwidth
3) Sampling rate up to 1GSa/s
4) 8M memory depth
5) Vertical range 2mV/div ~ 10V/div
6) Built-in 1CH 25MHz waveform generator, support arbitrary waveform burst output, support modulation waveform output (only for DSO2D10, DSO2D15)
7) Vertical resolution: 8bit
8) Trigger: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
9) BUS decode and protocol analysis: RS232/UART, I2C, SPI, CAN, LIN
10) Can save multiple data formats, such as settings, waveforms, reference waveforms, CSV, pictures
11) A 3-digit digital voltage meter and a 6-digit hardware frequency indicator
12) 32 kinds of automatic measurements with statistics, real-time statistics of maximum, minimum, standard deviation and etc.
13) 2 sets of digital voltmeters
14) Support threshold testing, free measurements within the screen
15) Abundant SCPI remote command control
16) USB Host/Device

Model Selection Guide

Model Channel Bandwidth Sample Rate Memory Depth AFG
(Arbitrary Function Generator)
DS02C10 2Ch 100MHz 1GSa/s 8MSamples N/A
DS02C15 2Ch 150MHz 1GSa/s 8MSamples N/A
DS02D10 2Ch + 1Ch 100MHz 1GSa/s 8MSamples 1Ch
DS02D15 2Ch + 1Ch 150MHz 1GSa/s 8MSamples 1Ch
Specification
Model DSO2D15 DSO2D10 DSO2D15 DSO2C10
Bandwidth 150MHz 100MHz 150MHz 100MHz
Oscilloscope Channels 2Ch 2Ch 2Ch 2Ch
Arbitrary Function Generator 1Ch 1Ch 　 　
Horizontal
SEC/DIV Range 2ns/div to 100s/div, in a 1, 2, 5 sequence
Delta Time Measurement Accuracy
(Full Bandwidth) Single, sampling mode
± (1 sample interval + 100ppm × reading + 0.6ns)
>16 times above average
± (1 sample interval + 100ppm × reading + 0.4ns)
Sample interval = s/div ÷ 200
Vertical
A/D Converter 8-bit resolution, each channel sampled simultaneously
VOLTS/DIV Range 2mV/div to 10V/div at input BNC
Offset Range 2mV/div ~ 200mV/div, ±1V
500mV/div ~ 10V/div, ±50V
Selectable Analog Bandwidth Limit (Typical) 20MHz
Low Frequency Response (−3db) ≤10Hz at BNC
Rising Time at BNC (Typical) DSO2C10  DSO2C15  DSO2D10 DSO2D15
≤3.5ns ≤2.4ns ≤3.5ns ≤2.4ns
DC Gain Accuracy ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div
±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
Vertical Offset Accuracy ±0.1div±2mV±1% Offset
Mathematical Operation +, −, ×, /, FFT
FFT Window Function Types: Rectangle, Hanning, Hamming, Blackman, Bartlett and Flat Top
Voltage Measurement Repeatability, Average Acquisition Mode  Under the same setting and environment, ≥16 waveforms are sampled, ΔV of any two averages:
± (3% × value + 0.05 div)
Note: Bandwidth reduced to 6MHz when using a 1X probe  
Acquisition
Sample Rate Range 1GSa/s (single channel), 500MSa/s (dual channels)
Acquisition Modes Normal, Peak, Average & High Resolution
Waveform Interpolation (sin x)/x
Acquisition Rate (Typical) Up to 2000 waveform per second per channel (Normal acquisition mode, no measurement)
Minimum Detection Pulse Width 2ns
Single Sequence Acquisition Mode Acquisition Stop Time
Normal, Peak Detect Upon single acquisition on all channels simultaneously
Average After N acquisitions on all channels simultaneously, N can be set to 4, 8, 16, 32, 64 or 128
Memory Depth Maximum 8M for single channel (4K, 40K, 400K, 4M, 8M optional)
Maximum 4M for dual channels (4K, 40K, 400K, 4M optional)
Trigger
Trigger Type   Edge, Pulse width, Video, Slope, Overtime, Window, Pattern, Interval, Delay, UART, LIN, CAN, SPI, lIC
Trigger Level Range ±5 divisions from the center of the screen
Mode Auto, Normal, Single
Level CH1 ~ CH2 ±5 divisions from the center of screen
EXT 0~3.3V [CMOS]
Holdoff Range 20ns ~ 10s
Trigger Level Accuracy CH1~CH2 0.2 div × volts/div within ±4 divisions from the center of the screen
EXT ± (Set value × 6% + 40mV)
Trigger Sensitivity ±0.2div
Edge Trigger
Slope Rising, Falling, Rising & Faling
Source CH1 ~ CH2, Line, External
Pulse Trigger 
Polarity  Positive, Negative
Condition <，>，!=，=
Source  CH1 ~ CH2
Pulse Width Range   8ns ~ 10s
Accuracy 8ns
Video Trigger 
Signal standard  NTSC, PAL 
Signal source CH1 ~ CH2
Synchronization  ScanLine, LinrNum, OddField, EvenField and AllField
Slope Trigger 
 Slope   Nse, Fall
Condition <, >, !=, =
Source  CH1 ~ CH2
Time Range  8ns ~ 10s
Accuracy  8ns
Overtime Trigger
Source  CH1 ~ CH2,
Polarity  Positive, Negative
Time range  8ns ~ 10s
Accuracy  8ns
Window Trigger 
Source  CH1 ~ CH2
Pattern Trigger
Pattern 0: low level; 1: high level; X: ignore 
Level  CH1 ~ CH2
Interval Trigger
Slope Rising, Falling
Condition <, >, !=, =
Signal Source   CH1 ~ CH2
Time Range  8ns ~ 10s
Accuracy  8ns
Under Amp Trigger
Polarity  Positive, Negative
Condition  <, >, !=, =
Source  CH1 ~ CH2
Time Range  8ns ~ 10s
Accuracy  8ns
UART Trigger
Condition Start, Stop, Data, Parity Error, COM Error
Source CH1 ~ CH2
Data Format Hex
Condition <, >, !=, =
Data Length 1 byte
Data Bits Width 5 bit, 6 bit, 7 bit, 8 bit
Parity Check None, Odd, Even
Idle Level High, Low
Baud Rate (Selectable) 110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
Baud Rate (Custom) 300bit/s ~ 334000bit/s
LIN Trigger
Condition Interval Field, Sync Field, Id field, Sync Id Error, Identifier, Id and Data
Source CH1 ~ CH2
Data Format Hex
Baud Rate (Selectable) 110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
Baud Rate (Custom) 300bit/s ~ 334000bit/s
CAN Trigger
Condition Start Bit, Remote Frame, Data Frame Id, Frame Id, Data Frame Id A, Error Frame, All Error, Ack Error, Overload Frame
Source CH1 ~ CH2
Data format Hex
Baud Rate (Selectable) 10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000,1000000
Baud Rate (Custom) 5kbit/s ~ 1Mbit/s
SPI Trigger
Source (SDA/SCL) CH1 ~ CH2
Data Format Hex
Data Length 4, 8, 16, 24, 32
IIC Trigger
Source (SDA/SCL) CH1~CH2
Data Format Hex
Data Index 0~3
Condition Start Bit, Stop Bit, No Ack, Address, Restart, Address and Data
Input
Number of Channels 2 analog channels
Input Coupling DC, AC or GND
Input Impedance, DC Coupled 20pF ± 3pF, 1MΩ ± 2%
Probe Attenuation 1X, 10X
Supported Probe Attenuation Factors 1X, 10X, 100X, 1000X
Overvoltage Category 300V CAT II
Maximum Input Voltage 300V_RMS (10X)
Isolation Between Channels >40dB
Delay Deviation Between Channels <500ps
Measurements
Cursors Voltage difference between cursors: ΔV
Time difference between cursors: ΔT
Reciprocal of ΔT in Hertz (1/ΔT)
Automatic Measurements PkPk, Frequency, Average, Max, Min, Period, Vtop, Vmid, Vbase, Vamp, RMS, R-Overshoot, PeriodRms, F-Preshoot, PeriodRms, PeriodAvg, RiseTime, FallTime, +Width, −Width, +Duty,
−Duty, FRR, FFF, F−Overshoot, R−preshoot, BWidth, FRF, FFR, LRR, LRF, LFR and LFF
DVM Data source  CH1, CH2
Measurement type DC RMS, AC RMS, DC
Frequency meter  hardware 6 bits frequency meter 
Math Operation
Source CH1~CH2
Operator +, −, x, /, FFT
FFT Point 1024
Window Rectangle, Hanning, Hamming, Blackman, Bartlett, Flattop
Display Show only or show all
Vertical scale dB, VRms
Storage
Save/Recall (Non-volatile) 9 types of files can be saved and recalled internally, including settings, waveforms, and references
Save to External Memory CSV file, BMP picture (24 bit)
Arbitrary Waveform Generator
Channel   1
Standard Waveforms Sine, Square, Ramp, Exponential, Noise, DC
Sin  Frequency range 0.1Hz ~ 25MHz
Square / Pulse Frequency range 0.1Hz ~ 10MHz
Duty 1% ~ 99%
Triangular Wave  Frequency range 0.1Hz ~ 1MHz
Ramp Frequency range 0.1Hz ~ 1MHz
Symmetry 0% ~ 100%
Exponential Frequency range 0.1Hz ~ 5MHz
Noise  Bandwidth >25MHz
DC offset  Range ±3.5V, high impedance 
±1.75V, 50Ω
Resolution 100µV or 3 bits, take the greater one
Accuracy 2% (1kHz)
Arbitrary waveform Frequency Range 1µHz ~ 25MHz
Wave length 4096
Support PC download and external memory recall
Output impedance  50 Ω + 1%, high impedance
Amplitude  Output range 10mV ~ 7Vp-p (high impedance )
5mV ~ 3.5Vp-p (50Ω)
Amplitude accuracy ±3dB 　
Waveform Depth  4KSa
Frequency Resolution 1uHz
Frequency Accuracy  <10KHz,100ppm
>10KHz,50ppm
Modulation FM Modulation waveform Sine, square, ramp
Modulation frequency 1Hz ~ 50kHz
Modulation deviation 0.1Hz ~ Carrier frequency
AM Modulation waveform Sine, square, ramp
Modulation frequency 1Hz ~ 50KHz
Modulation depth 0% ~ 120%
Burst Types of N Cycle, Infinite
Number of cycles 1 ~ 1024
Trigger source Manual
Trigger Input Signal Source
Level MOS
Probe Compensator Output
Output Voltage (Typical) 5V
Frequency (Typical) 1kHz ± 1%
Display
Display Type 7 inchs TFT (diagonal liquid crystal)
Display Resolution 800 (horizontal) × 480 (vertical) pixels
Display Type Point, vector
Waveform Brightness Adjustable
Grid Type Adjustable
Grid Brightness Adjustable
Screen Brightness Adjustable
Display Colour 16 million colours (24 bits true colour)
Persistence time Minimum, 1s, 5s, 10s, 30s, infinite
Interface
Standard Interface USB Host, USB Device
Power Supply
Supply Voltage 100 ~ 120VAC_RMS(±10%), 45Hz to 440Hz, CAT II
120 ~ 240VAC_RMS(±10%), 45Hz to 66Hz, CAT II
Power Consumption <15W
Fuse T2A 250VAC 4*8
Environmental
Operating Temperature 0 to 50 °C (32 to 122 °F)
Storage Temperature −40 to +71 °C (−40 to 159.8 °F)
Humidity ≤ +104°F (≤ +40°C): ≤90% relative humidity
Cooling Method 106°F ~ 122°F (+41°C ~50°C): ≤60% relative humidity
Altitude Operating and Nonoperating 3,000m (10,000 feet)
Random Vibration 0.31g_RMS from 50Hz to 500Hz, 10 minutes on each axis
Nonoperating 2.46g_RMS from 5Hz to 500Hz, 10 minutes on each axis
Mechanical Shock Operating 50g, 11ms, half sine
Mechanical
Dimension  318 × 110 × 150mm (L × W × H)
Weight 1900g

Model	Channel	Bandwidth	Sample Rate	Memory Depth	AFG (Arbitrary Function Generator)
DS02C10	2Ch	100MHz	1GSa/s	8MSamples	N/A
DS02C15	2Ch	150MHz	1GSa/s	8MSamples	N/A
DS02D10	2Ch + 1Ch	100MHz	1GSa/s	8MSamples	1Ch
DS02D15	2Ch + 1Ch	150MHz	1GSa/s	8MSamples	1Ch

Model	DSO2D15	DSO2D10	DSO2D15	DSO2C10
Bandwidth	150MHz	100MHz	150MHz	100MHz
Oscilloscope Channels	2Ch	2Ch	2Ch	2Ch
Arbitrary Function Generator	1Ch	1Ch
Horizontal
SEC/DIV Range	2ns/div to 100s/div, in a 1, 2, 5 sequence
Delta Time Measurement Accuracy (Full Bandwidth)	Single, sampling mode ± (1 sample interval + 100ppm × reading + 0.6ns)
	>16 times above average ± (1 sample interval + 100ppm × reading + 0.4ns)
	Sample interval = s/div ÷ 200
Vertical
A/D Converter	8-bit resolution, each channel sampled simultaneously
VOLTS/DIV Range	2mV/div to 10V/div at input BNC
Offset Range	2mV/div ~ 200mV/div, ±1V 500mV/div ~ 10V/div, ±50V
Selectable Analog Bandwidth Limit (Typical)	20MHz
Low Frequency Response (−3db)	≤10Hz at BNC
Rising Time at BNC (Typical)	DSO2C10	DSO2C15	DSO2D10	DSO2D15
	≤3.5ns	≤2.4ns	≤3.5ns	≤2.4ns
DC Gain Accuracy	±3% for Normal or Average acquisition mode, 10V/div to 10mV/div
	±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
Vertical Offset Accuracy	±0.1div±2mV±1% Offset
Mathematical Operation	+, −, ×, /, FFT
FFT	Window Function Types: Rectangle, Hanning, Hamming, Blackman, Bartlett and Flat Top
Voltage Measurement Repeatability, Average Acquisition Mode	Under the same setting and environment, ≥16 waveforms are sampled, ΔV of any two averages: ± (3% × value + 0.05 div)
Note: Bandwidth reduced to 6MHz when using a 1X probe
Acquisition
Sample Rate Range	1GSa/s (single channel), 500MSa/s (dual channels)
Acquisition Modes	Normal, Peak, Average & High Resolution
Waveform Interpolation	(sin x)/x
Acquisition Rate (Typical)	Up to 2000 waveform per second per channel (Normal acquisition mode, no measurement)
Minimum Detection Pulse Width	2ns
Single Sequence	Acquisition Mode		Acquisition Stop Time
	Normal, Peak Detect		Upon single acquisition on all channels simultaneously
	Average		After N acquisitions on all channels simultaneously, N can be set to 4, 8, 16, 32, 64 or 128
Memory Depth	Maximum 8M for single channel (4K, 40K, 400K, 4M, 8M optional) Maximum 4M for dual channels (4K, 40K, 400K, 4M optional)
Trigger
Trigger Type	Edge, Pulse width, Video, Slope, Overtime, Window, Pattern, Interval, Delay, UART, LIN, CAN, SPI, lIC
Trigger Level Range	±5 divisions from the center of the screen
Mode	Auto, Normal, Single
Level	CH1 ~ CH2	±5 divisions from the center of screen
	EXT	0~3.3V [CMOS]
Holdoff Range	20ns ~ 10s
Trigger Level Accuracy	CH1~CH2	0.2 div × volts/div within ±4 divisions from the center of the screen
	EXT	± (Set value × 6% + 40mV)
Trigger Sensitivity	±0.2div
Edge Trigger
Slope	Rising, Falling, Rising & Faling
Source	CH1 ~ CH2, Line, External
Pulse Trigger
Polarity	Positive, Negative
Condition	<，>，!=，=
Source	CH1 ~ CH2
Pulse Width Range	8ns ~ 10s
Accuracy	8ns
Video Trigger
Signal standard	NTSC, PAL
Signal source	CH1 ~ CH2
Synchronization	ScanLine, LinrNum, OddField, EvenField and AllField
Slope Trigger
Slope	Nse, Fall
Condition	<, >, !=, =
Source	CH1 ~ CH2
Time Range	8ns ~ 10s
Accuracy	8ns
Overtime Trigger
Source	CH1 ~ CH2,
Polarity	Positive, Negative
Time range	8ns ~ 10s
Accuracy	8ns
Window Trigger
Source	CH1 ~ CH2
Pattern Trigger
Pattern	0: low level; 1: high level; X: ignore
Level	CH1 ~ CH2
Interval Trigger
Slope	Rising, Falling
Condition	<, >, !=, =
Signal Source	CH1 ~ CH2
Time Range	8ns ~ 10s
Accuracy	8ns
Under Amp Trigger
Polarity	Positive, Negative
Condition	<, >, !=, =
Source	CH1 ~ CH2
Time Range	8ns ~ 10s
Accuracy	8ns
UART Trigger
Condition	Start, Stop, Data, Parity Error, COM Error
Source	CH1 ~ CH2
Data Format	Hex
Condition	<, >, !=, =
Data Length	1 byte
Data Bits Width	5 bit, 6 bit, 7 bit, 8 bit
Parity Check	None, Odd, Even
Idle Level	High, Low
Baud Rate (Selectable)	110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
Baud Rate (Custom)	300bit/s ~ 334000bit/s
LIN Trigger
Condition	Interval Field, Sync Field, Id field, Sync Id Error, Identifier, Id and Data
Source	CH1 ~ CH2
Data Format	Hex
Baud Rate (Selectable)	110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
Baud Rate (Custom)	300bit/s ~ 334000bit/s
CAN Trigger
Condition	Start Bit, Remote Frame, Data Frame Id, Frame Id, Data Frame Id A, Error Frame, All Error, Ack Error, Overload Frame
Source	CH1 ~ CH2
Data format	Hex
Baud Rate (Selectable)	10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000,1000000
Baud Rate (Custom)	5kbit/s ~ 1Mbit/s
SPI Trigger
Source (SDA/SCL)	CH1 ~ CH2
Data Format	Hex
Data Length	4, 8, 16, 24, 32
IIC Trigger
Source (SDA/SCL)	CH1~CH2
Data Format	Hex
Data Index	0~3
Condition	Start Bit, Stop Bit, No Ack, Address, Restart, Address and Data
Input
Number of Channels	2 analog channels
Input Coupling	DC, AC or GND
Input Impedance, DC Coupled	20pF ± 3pF, 1MΩ ± 2%
Probe Attenuation	1X, 10X
Supported Probe Attenuation Factors	1X, 10X, 100X, 1000X
Overvoltage Category	300V CAT II
Maximum Input Voltage	300V_RMS (10X)
Isolation Between Channels	>40dB
Delay Deviation Between Channels	<500ps
Measurements
Cursors	Voltage difference between cursors: ΔV
	Time difference between cursors: ΔT
	Reciprocal of ΔT in Hertz (1/ΔT)
Automatic Measurements	PkPk, Frequency, Average, Max, Min, Period, Vtop, Vmid, Vbase, Vamp, RMS, R-Overshoot, PeriodRms, F-Preshoot, PeriodRms, PeriodAvg, RiseTime, FallTime, +Width, −Width, +Duty, −Duty, FRR, FFF, F−Overshoot, R−preshoot, BWidth, FRF, FFR, LRR, LRF, LFR and LFF
DVM	Data source	CH1, CH2
	Measurement type	DC RMS, AC RMS, DC
	Frequency meter	hardware 6 bits frequency meter
Math Operation
Source	CH1~CH2
Operator	+, −, x, /, FFT
FFT	Point	1024
	Window	Rectangle, Hanning, Hamming, Blackman, Bartlett, Flattop
	Display	Show only or show all
	Vertical scale	dB, VRms
Storage
Save/Recall (Non-volatile)	9 types of files can be saved and recalled internally, including settings, waveforms, and references
Save to External Memory	CSV file, BMP picture (24 bit)
Arbitrary Waveform Generator
Channel	1
Standard Waveforms	Sine, Square, Ramp, Exponential, Noise, DC
Sin	Frequency range	0.1Hz ~ 25MHz
Square / Pulse	Frequency range	0.1Hz ~ 10MHz
	Duty	1% ~ 99%
Triangular Wave	Frequency range	0.1Hz ~ 1MHz
Ramp	Frequency range	0.1Hz ~ 1MHz
	Symmetry	0% ~ 100%
Exponential	Frequency range	0.1Hz ~ 5MHz
Noise	Bandwidth	>25MHz
DC offset	Range	±3.5V, high impedance
		±1.75V, 50Ω
	Resolution	100µV or 3 bits, take the greater one
	Accuracy	2% (1kHz)
Arbitrary waveform	Frequency Range	1µHz ~ 25MHz
	Wave length	4096
	Support PC download and external memory recall
Output impedance	50 Ω + 1%, high impedance
Amplitude	Output range	10mV ~ 7Vp-p (high impedance ) 5mV ~ 3.5Vp-p (50Ω)
Amplitude accuracy	±3dB
Waveform Depth	4KSa
Frequency Resolution	1uHz
Frequency Accuracy	<10KHz,100ppm >10KHz,50ppm
Modulation	FM	Modulation waveform		Sine, square, ramp
		Modulation frequency		1Hz ~ 50kHz
		Modulation deviation		0.1Hz ~ Carrier frequency
	AM	Modulation waveform		Sine, square, ramp
		Modulation frequency		1Hz ~ 50KHz
		Modulation depth		0% ~ 120%
Burst	Types of	N Cycle, Infinite
	Number of cycles	1 ~ 1024
	Trigger source	Manual
Trigger Input Signal Source
Level	MOS
Probe Compensator Output
Output Voltage (Typical)	5V
Frequency (Typical)	1kHz ± 1%
Display
Display Type	7 inchs TFT (diagonal liquid crystal)
Display Resolution	800 (horizontal) × 480 (vertical) pixels
Display Type	Point, vector
Waveform Brightness	Adjustable
Grid Type	Adjustable
Grid Brightness	Adjustable
Screen Brightness	Adjustable
Display Colour	16 million colours (24 bits true colour)
Persistence time	Minimum, 1s, 5s, 10s, 30s, infinite
Interface
Standard Interface	USB Host, USB Device
Power Supply
Supply Voltage	100 ~ 120VAC_RMS(±10%), 45Hz to 440Hz, CAT II
	120 ~ 240VAC_RMS(±10%), 45Hz to 66Hz, CAT II
Power Consumption	<15W
Fuse	T2A 250VAC 4*8
Environmental
Operating Temperature	0 to 50 °C (32 to 122 °F)
Storage Temperature	−40 to +71 °C (−40 to 159.8 °F)
Humidity	≤ +104°F (≤ +40°C): ≤90% relative humidity
Cooling Method	106°F ~ 122°F (+41°C ~50°C): ≤60% relative humidity
Altitude	Operating and Nonoperating		3,000m (10,000 feet)
	Random Vibration		0.31g_RMS from 50Hz to 500Hz, 10 minutes on each axis
	Nonoperating		2.46g_RMS from 5Hz to 500Hz, 10 minutes on each axis
Mechanical Shock	Operating		50g, 11ms, half sine
Mechanical
Dimension	318 × 110 × 150mm (L × W × H)
Weight	1900g