Simplex 4904-9174 Wall Strobe

The Simplex 4904-9174 wall mount visible notification appliances provide symmetrical light output in key axis directions. Using a compound, multi-surface reflector. The lens assembly fits securely into its housing, providing a high-integrity notification appliance.

When multiple strobes and their reflections can – seen from one location. Synchronized flashes reduce the probability of photo-sensitive reactions. The annoyance and possible distraction of random flashing. If synch output NACs – unavailable, two-wire circuit Flash Synchronization Modules can – used to control synchronized flash strobes.

The proper selection of wall-mount visible notification appliances is dependent on occupancy, location, local codes, and proper applications. SmartSync operation mode allows a two-wire circuit to provide the ability to activate. The horn and strobe – on the same NAC. Allow the horn to be silent while the strobe remains flashing. The horn operates as “on-until-silenced” while the strobe operation is “on-until-reset.”

Simplex 4904-9174 Wall Strobe

Features / Specifications

• Models are available with 15, 30, or 110 candela
• 24 VDC operation with switch selection for free-run or synchronized flash rate. Compatible with SmartSync strobe operation
• Compatible with ADA requirements
• Strobe candela rating – indicated on the reflector
• Diode polarized input for connection to reverse polarity supervised Notification Appliance Circuit (NAC)
• Rugged, high-impact, flame-retardant thermoplastic housing