Two Piece K Series Scatter Shield By ASP Headers, LLC 

Honda Acura K20 and K24 transmissions. Required for a 11.49 sec. quarter mile or quicker.  This Two piece designed for a quick and easy install. The scatter shields purpose is to stop the flywheel from shattering through the firewall in the case of an accident. 

• Made in USA
• Material: .25" thick by 3" wide mild steel.
• NHRA: Coverage meets NHRA requirements. 
• Includes: Black powder coat for longevity. Steel hardware: socket screws, washers, and lock washers.
• Restrictions: Does not clear the often removed stock RSX front mount or heater tube used for AC.

www.nhra.com

SECTION 20 | GENERAL REGULATIONS | 2:10 FLYWHEEL SHIELD: OTHER CLASSES
All front-wheel-drive or transverse-mounted applications using a clutch and running 11.49 or quicker, for which an SFI Spec 6.1, 6.2, 6.3, or 9.1 flywheel shield is not commercially available, must be equipped with a flywheel shield made of 1/4-inch minimum thickness steel plate. Shield must surround the bellhousing completely except for area of bellhousing adjacent to differential and axle shaft. Shield may be multi-piece, with pieces bolted together using minimum 3/8-inch-diameter Grade 5 or M10 class 8.8 bolts; may be attached to engine and/or bellhousing.