SP107E LED Controller
IMPORTANT: Vcc output voltage equals DC IN.
Please note, iPhone requires IOS version 10.0 or later.
SP107E Musical LED controller allows you to control the LED strips as by musical notes via an audio input.
Plenty of colourful modes are available to suit your needs.
Suitable for WS2813 SK9822 SK6812RGB SK6812RGBW LED Strip or LED Matrix Panel
Audio Input:
There are two ways to input the audio signal on SP107E, AUX IN, and Built-in microphone;
•AUX IN: Plug the supplied audio split cable into the “AUX IN” jack, connect the audio output source and the speaker(or headset), the controller will automatically switch into AUX input mode;
•MIC: Disconnect the audio cable, the controller will automatically switch into microphone input mode.
Can be set and controlled via LED Chord App connecting to the controller over Bluetooth.
APP Operations:
1. Search ”Led Chord” in App Store or Google play or scan this QR code to download and install the App:
2. Make sure you have turned on Bluetooth on your phone;
3. Open the APP, drag down to refresh the device list, select device name “SP107E” to connect the controller;
4. Select RGB order and IC type;
5. Adjust the pixel number;
6. Press ENTER.
Please note:
1. The controller can support WS2812B and WS2813 but there is no option on the setting page.
Please choose WS2811 when connecting to WS2812B and WS2813.
When connecting WS2813 LED strip, please connect Bi wire to GND port.
2. The controller cannot regulate the output voltage at the VCC.
That means the output voltage of your power supply must be the same as the work voltage of your led lights.
If your lights need 5V input, please use a 5V power supply, never use 12V or 24V power supply.
3. The controller only supports LED lights with smart IC.
It cannot support ordinary RGB/RGBW LED strip without IC.
4. Please use a power supply not a battery to power the controller.
The output power of power supply must be more than the max power of led light.
Specifications:
Working Voltage : DC5V-24V
Working Current : 20mA-130mA
Working temperature : -20 - +60 Degrees Celsius
Remote distance : 20 meters
No. of pixels : upto 960 pixels
Size : 85 x 45 x 22mm
Weight : 60g
Package includes: Tested before dispatch. No LED strip, speakers or cellphone included
1x SP107E Controller
1x Aux Audio Cable Splitter (Female to 2x Male)
1x Screw Driver
1x DC Female Jack with leads
1x JST-SM 3Pin male connector commonly found on LED strips
1x User Manual
Important Note:
Our goal is to achieve 5-star rating for each transaction.
If you are not 100% satisfied, PLEASE do not leave a neutral or negative feedback but contact us by eBay message or email first so that we can help you.
All of our products are stocked at our London premises therefore there are no delays in posting.
We will dispatch all orders the same day if the order has been placed before 3:00pm Monday - Friday (excluding public holidays).
All orders are processed by third party dispatching software and therefore eBay's confirmation dispatch email may be delayed.
Orders dispatched via Royal Mail may be upgraded to Signed-For or Tracked service at our discretion.
Average delivery times for Royal Mail are 1-3 days for 1st/24 and 3-5 days for 2nd/48.
Only Royal Mail's Special Delivery service is guaranteed next working day (Mon-Fri) service.
Most items which are not received are caused by incomplete addresses such as no door number, or incorrect street name or postcode.
Payment is via eBay's checkout facility.
Once payment has been same, requests for change of delivery address will not be accepted due to eBay's Buyer Protection Scheme.
Orders must be cancelled and reordered with the correct delivery address.
Warranty
If you have simply changed your mind or no longer require the item(s), you must notify us within 30 days from receiving your order.
The item(s) must be in their original unused and unopened packaging and be in a resalable condition for a full refund.
You will need to pay for the cost of returning the item(s) and the item(s) remain your responsibility until we receive them.
Damaged caused during transit must be notified within two days of the delivery.
All items sold as tested are genuinely tested before dispatch.
Product(s) which show obvious signs of misuse, damage or weather damage will not be eligible for refund or replacement.
All items are security marked.
Please ensure all security markings and stickers are intact or any warranty offered will be void.
All items are subject to satisfactory inspection of the anti-tamper warranty sticker/seal.
Any evidence that these aforementioned stickers/seals have been removed or broken will render the item out of warranty and will not be covered under warranty rules.
If the item becomes faulty within that period a replacement will be issued free of charge upon receipt of the faulty item, back to us, if proved to be faulty upon inspection.
If the item is not faulty or can be repaired, not to the detriment of the item, then this shall be undertaken rather than direct replacement.
Warranty Exclusion: Please note that as batteries are "consumables" we only provide dead on arrival warranty.
The maximum capacity of all rechargeable batteries fades with time depending on application and usage patterns.
This is considered normal - therefore, a change in battery capacity is not covered under warranty.
Battery life is not warranted and will vary depending on usage.
Please note- Any software is not covered by the warranty policy. Please refer to the copyright owner for specific details.