eBay

⭐【Material】- Aluminium 6061 material, good corrosion resistance, high strength and durable

⭐【Specifications】- Suitable for handlebar diameter 25.4 / 31.8 mm and front fork diameter 28.6 mm, distance between the centers of two holes: 90mm / 110 mm / 120mm, angle: ± 60 degrees

⭐【Convenient】- Use this bike stem to make your ride more comfortable, easier to climb

⭐【Easy to Use】- Simply connect to the original fork and handlebar. The screw lock is firmly fixed and does not fall off easily

⭐【Application】- Fits for most road bikes, mountain bikes, track bike, MTB, BMX, etc

Specifications:

Material: 6061 Aluminum Alloy

Steerer Tube Diameter: 28.6mm(1-1/8")

Steerer Height: 40mm

Handlebar Clamp Diameter: 25.4mm and 31.8mm

Faceplate Width: 40mm

Length: 110mm

Angle: +60/-60 degree adjustable angle

Colour: matt black

Weight: about 270 g

Compatible Handlebar Type


Road Handlebars	MTB Handlebars	Butterfly Handlebars	Aircraft Handlebar

Installation Steps


1. Loosening up the front fork bolts with a 5mm allen key, slide the replacement stem onto the steerer, then tighten the bolts.	2. Loosening the expander bolt with a 6mm hex wrench and adjust the position of the stem, then re-tightening the bolts.	3. Center the bars in the stem clamp, get it set at the angle you like, and then reattach the faceplate.	4. Tightening each bolts on the faceplate to complete the installation.

Specifications:

Compatible Handlebar Type

Road Handlebars

MTB Handlebars

Butterfly Handlebars

Aircraft Handlebar