This product can be used as a high and low temperature remote mobile phone alarm, when the temperature exceeds the upper limit or falls below the lower limit, it will automatically push the alarm sound to the phone! Local temperature control can be self-opening and high-closing or high-opening and low-closing functions.
It is very suitable for the temperature that needs to be monitored in warehouses, breeding, computer rooms, etc., and can also be used for fire warning, set and use according to needs! ! !
Things to know before buying:
The WIFI smart thermostat uses the mobile phone to control the output through the network. When setting or remote control, the controller must be set or controlled when the WIFI signal is relatively good. The mobile phone must be connected through WIFI or 3G, 4G At Interent, after setting the parameters, the setting requires certain professional knowledge, please be patient. The products have been used in batches, and generally there will be no major problems.
The product has no paper manual, please contact customer service for an electronic version.
special function:
1. With digital display function, the APP terminal can display the actual temperature, start value and stop value
2. Built-in 10A relay, maximum can control 2KW resistive load or 500W inductive load, please connect contactor for larger load
3. The temperature probe adopts 10K3950, which can be extended by itself, and it is effective within tens of meters
4. After the parameters are set, they can run automatically according to the set value without WIFI
5. Input 220V voltage, output 220V, simple wiring
6. The remote temperature alarm function can be turned on, and the alarm can be pushed to the mobile phone when over temperature
Note that the alarm requires both the device and the mobile phone to be online. Without a network, it is like making a call without a mobile phone signal!
Configuration process:
●Installation preparation:
●For Android phones, search for "Tuya Smart" in the application market and download and install the APP
●Search for "Tuya Smart" in the APP Store and install the APP.
●After installing the APP, please use your mobile phone or email to register an account.
●Note that if you are using an Android phone, please use the system default font, otherwise the display will be confused
Process of adding devices to mobile APP:
1. Connect the wires according to the wiring diagram. After the first power-on, the device enters the WIFI configuration mode by default.
Note: If the device has been added to the APP and needs to be reconfigured, you need to press and hold the configuration button before powering on, until the digital tube
Show the circular running light and release the button, the device enters the WIFI configuration mode at this time
2. Open the APP and click the "+" icon in the upper right corner to select any device.
3. Click "Confirm that the indicator light is flashing fast" on the APP
4. Prompt to select a wifi with normal Internet access and enter the password. After confirming the password and entering it correctly, click "OK".
4.1 The device uses 2.4G wifi communication protocol and does not support 5G network temporarily.
4.2 If the network is set to hide or filter the MAC address, please ask the network administrator to enter the background to modify the settings, and then add the device.
5. The APP automatically starts configuration, and the device is successfully added when the progress bar reaches 100%.
6. After adding successfully, you can rename the device.
Note: After the addition is successful, if you reconfigure, the device will be automatically deleted from the current APP.
Appearance size: 89*55*44(mm)
Working power and power consumption: default AC220V wide voltage, 100V-260V, power <3W
Control range and accuracy: -39 degrees Celsius -140 degrees Celsius, plus or minus one degree, resolution 0.1 degree
Relay life: 100,000 times on and off
Output:
1: 220V normally open output
2: The contact current capacity is 10A for resistive load and 2A for inductive load. It can control 2000W resistive load or 500W motor or water pump. Larger loads need to be expanded with AC contactors.
Parameter memory: set parameters will be kept in memory for a long time after power off, and temperature control can be performed offline.
Functions and features:
Remote switch device status, real-time synchronous feedback of temperature
It can run independently without wifi, and realize the function of single-machine temperature control.
The temperature control output can be turned on or off remotely or manually on site (when the set temperature is not reached)
High-open and low-close control cooling (cooling), or low-open high-close control heating (heating)
Remote high and low temperature alarm APP push function.
APP remote temperature calibration function, APP can display actual temperature, start temperature, stop temperature, upper limit alarm temperature.
The master account can share the device with others, and the device can only be added under one master account.
It is suitable for various commercial and industrial sites, such as heating and cooling control of HVAC systems, hot water projects, boilers, breeding, incubation, intelligent electromechanical equipment, etc., built-in 10A relay, which can meet most loads.
WM96T adopts wide voltage power supply, built-in high-performance dual-processor, local control adopts 8-bit MCU, WIFI module adopts 32-bit MCU, strong anti-interference ability, suitable for various harsh industrial places, and can ensure the stable, reliable and continuous operation of the controller.
we will send them in 2-3 days, and the shipment time will be about 10-25 working days
Your satisfaction is our first priority. We appreciate your positive feedback
Please don't hesitate to contact us for everything
we will shiped them to worldwild
thanks very mcuh and wish you have a nice day^_^
