Dear customers, this link contains two light strips: A and B. There are detailed parameter information below. Please read carefully before buying. If you have any questions, please contact us! Thanks!
MODE A:
Note:
The light only works with a motion sensor when in dark.
When the light is sufficient, no matter whether someone enters the sensing area or not, it will not light up.
Specification:
--Material:Aluminum alloy+plastic
--LED Chip Code :2835
--Maximum compatible power: 2W
--Voltage: 3.5V
--Working current: ≤ 110mA, ≤ 130mA, ≤ 170mA
--Sensing time :≤25±3S
--Sensing distance:<0-3m
--Colour temperature: 6500K cold white ； 3000K warm white
--Power Supply : USB
--Switch : button switch
--Battery: built-in battery
--Material: LED Light: plastic ; Magnetic Strip: Metal
--Size (Length):10LED:15cm、14LED:21cm、20LED:30cm
--Power :10LED 0.7W、14LED 0.9W、20LED 1.2W
--3 light modes,how to switch?(The 3 modes cycle in turn)
1.Press firstly for long light mode
2.Press secondly for sensing mode （it only works when in dark）
3.Press thirdly for turning off
--Long press 2 seconds for light dimming
Features：
-----Long working time and rechargeable
built-in rechargeable battery power supply (large capacity 400-600mAh), no AAA battery required, saving costs. Charged by any 5V USB device (such as USB adapter, mobile power supply, laptop), including charging cable.
---Easy to use (2 ways to install this light bar easily)
Method 1: It can be freely adsorbed on the surface of any iron products without any tools, such as refrigerator, barbecue or in-gun safe;
Method 2: With the help of metal magnetic strip and adhesive, it can be used on non-ferrous products and clean surfaces
-----Applicable to
cabinets, cabinets, wardrobes, corridors, stairs, bedrooms, basements, bathrooms, kitchens, closets, drawers, et
Package Include
1x LED light
1x USB cable
Magnetic strip with adhesive
MODE B:
Note:
The light only works with a motion sensor when in dark.
When the light is sufficient, no matter whether someone enters the sensing area or not, it will not light up.
Specification:
--Maximum compatible power: 2W
--Voltage: 5V
--Working current: ≤ 110mA, ≤ 130mA, ≤ 170mA
--Sensing distance:<0-3m
--Colour temperature: 6500K cold white ； 3000K warm white
--Power Supply : USB
--Switch : button switch
--Battery: built-in battery
--Material: LED Light: plastic ; Magnetic Strip: Metal
--Indicator light state ：Red is displayed when charging, will turn off when fully charged
--Size (Length):12LED:11cm;26LED:20cm;40LED:30cm
--3 light modes,how to switch?(The 3 modes cycle in turn)
1. Press firstly, the light flash twice then enter into sensing mode (it only works when in dark);
2. Press Secondly , the light flash once then enter into long light mode;
3. Press thirdly then turn off
Features：
-----Long working time and rechargeable
built-in rechargeable battery power supply (large capacity 300-650mAh), no AAA battery required, saving costs. Charged by any 5V USB device (such as USB adapter, mobile power supply, laptop), including charging cable;
-----Easy to use
Use the attached metal strip and double-sided adhesive tape to stick on any non-ferrous products and clean surface;
-----Applicable to
cabinets, cabinets, wardrobes, corridors, stairs, bedrooms, basements, bathrooms, kitchens, closets, drawers, et;
Package Include
1x LED light
1x USB cable
Magnetic strip with adhesive
