Welcome to my shop
Product Overview
B200 AD9361 RF 70MHz -6GHz SDR USB3.0 Compatible with USRP B200 Full duplex SDR
Detail
B200 Advance Version 70-6000MHz SDR Radio Software Defined Radio USB3.0 SDR Transceiver with Shell
Specifications:
- Data interface: usb3.0
- FPGA: for Spartan 6 XC6SLX75
- Transceiver: AD9361 dual-channel rf transceiver
- IIP3 (at typical NF): -20dBm
- Power Output: > 10dBm
- Receive Noise Figure: < 8dB
- ADC Sample Rate (Max.): 61.44MS/s
- ADC Resolution: 12 bits
- DAC Sample Rate (Max.): 61.44MS/s
- DAC Resolution: 12 bits
- Host Sample Rate (16b): 61.44MS/s
- Frequency Accuracy (without reference clock): ±2.0 ppm
- Frequency Accuracy (with reference clock): ±1PPB (0.001PPM)
- Size: 150 x 100mm/5.9 x 3.9"
- Frequency range: 70-6000Mhz
- TX port count: 2
- RX port count: 2
Package Included:
- 1 x SDR Radio
- 1 x USB Cable
- 1 x Pin Cable
More Information:
You can run B200 advance as original USRP B200 or run B200 advance to support 2RX or 2TX using our FPGA firmware. But it can not support 2tx2rx at the same time.
To use our FPGA firmware you need to modify B200 advance to B210. using below command to modify B200 to B210:
sudo ./usrp_burn_mb_eeprom --args="type=b200" --values="name=MY-B210,serial=8000137,product=2,revision=4"
If you don't know where usrp_burn_mb_eeprom is you can find it:
cd /
sudo find -name usrp_burn_mb_eeprom
Then copy our fpga firmware to original B210 fpga firmware path. But you may need to save original B210 fpga firmware first.
sudo cp /usr/share/uhd/images/usrp_b210_fpga.bin /usr/share/uhd/images/usrp_b210_fpga_back.bin
sudo cp ./b200_fpga_2tx.bin /usr/share/uhd/images/usrp_b210_fpga.bin
The original fpga firmware path is depend on uhd version. You can find it using find command.
To modify B210 to B200 you can run this command:
sudo ./usrp_burn_mb_eeprom --args="type=b200" --values="name=MY-B210,serial=8000137,product=1,revision=4"
B200 Advance Version 70-6000MHz SDR Radio Software Defined Radio USB3.0 SDR Transceiver with Shell
Specifications:
- Data interface: usb3.0
- FPGA: for Spartan 6 XC6SLX75
- Transceiver: AD9361 dual-channel rf transceiver
- IIP3 (at typical NF): -20dBm
- Power Output: > 10dBm
- Receive Noise Figure: < 8dB
- ADC Sample Rate (Max.): 61.44MS/s
- ADC Resolution: 12 bits
- DAC Sample Rate (Max.): 61.44MS/s
- DAC Resolution: 12 bits
- Host Sample Rate (16b): 61.44MS/s
- Frequency Accuracy (without reference clock): ±2.0 ppm
- Frequency Accuracy (with reference clock): ±1PPB (0.001PPM)
- Size: 150 x 100mm/5.9 x 3.9"
- Frequency range: 70-6000Mhz
- TX port count: 2
- RX port count: 2
Package Included:
- 1 x SDR Radio
- 1 x USB Cable
- 1 x Pin Cable
More Information:
You can run B200 advance as original USRP B200 or run B200 advance to support 2RX or 2TX using our FPGA firmware. But it can not support 2tx2rx at the same time.
To use our FPGA firmware you need to modify B200 advance to B210. using below command to modify B200 to B210:
sudo ./usrp_burn_mb_eeprom --args="type=b200" --values="name=MY-B210,serial=8000137,product=2,revision=4"
If you don't know where usrp_burn_mb_eeprom is you can find it:
cd /
sudo find -name usrp_burn_mb_eeprom
Then copy our fpga firmware to original B210 fpga firmware path. But you may need to save original B210 fpga firmware first.
sudo cp /usr/share/uhd/images/usrp_b210_fpga.bin /usr/share/uhd/images/usrp_b210_fpga_back.bin
sudo cp ./b200_fpga_2tx.bin /usr/share/uhd/images/usrp_b210_fpga.bin
The original fpga firmware path is depend on uhd version. You can find it using find command.
To modify B210 to B200 you can run this command:
sudo ./usrp_burn_mb_eeprom --args="type=b200" --values="name=MY-B210,serial=8000137,product=1,revision=4"
1. PayPal payment accepted only.
2. Items will be shipped to your eBay address. Please make sure it is correct.
3. Payment must be received 4 days after auction ended.
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.
When you satisfied with our product and services please leave us positive feedback.
If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay.
On Jun 30, 2022 at 23:13:41 PDT, seller added the following information: