You can reset it to factory defaults or use the password info included with the modem to configure as needed.

Thanks for looking!

 SBG901 Features
 General
 Availability:discontinued
 Warranty:1 year(s)
 LAN / WAN Connectivity
 WAN throughput:38 Mbps
 WAN throughput upstream:30 Mbps
 WAN ports:1
 WAN port(s) type:Coax F-connector
 LAN ports:1
 LAN ports type:10/100 Base-TX (RJ-45)
 LAN ports auto cross-over:yes
 Router
 NAT routing:yes
 Multihomed:yes
 DMZ:yes
 Port forwarding:yes
 Port triggering:yes
 DHCP server:yes
 Dynamic DNS client:yes
 QoS:yes
 UPnP:yes
 Routing Protocols:RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
 Cable Modem
 DOCSIS compliance:DOCSIS 1.1
DOCSIS 2.0
 Wireless
 Maximum Wireless Speed:54 Mbps
 WiFi standards supported:802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
 Wifi security/authentication:WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
RADIUS authentication
 WiFi modes:Access point
 internal antenna(s):2
 WDS compatible:yes
 WMM (QoS):yes
 WPS (Wi-Fi Protected Setup):yes
 VPN
 IPSec
 IPSec passthrough:yes
 L2TP
 L2TP passthrough:yes
 PPTP
 PPTP passthrough:yes
 Firewall
 SPI firewall:yes
 DoS / DDoS protection:yes
 Intrusion Detection System (IDS):yes
 Security log:yes
 Filtering:Domain/URL blocking, IP Address filtering, MAC Address filtering, packet filtering, keyword/content filtering, date/time scheduling, Proxy, Java, ActiveX, Cookie
 Device Management
 Default IP address:192.168.0.1
 Default admin username:admin
 Default admin password:motorola
 Administration:Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
 Firmware upgradeable:yes
 Configuration backup/restore:yes
 Email alerts:yes
 Event log:yes
 Diagnostic functions:yes
ping, traceroute
 Misc hardware info
 SNMP support:SNMP v.1, SNMP v.2, SNMP v.3
 Links
 Datasheet:http://www.speedguide.net/images/hardwar...
 Manual:http://www.speedguide.net/images/hardwar...