


Specification of High Speed handpiece
Description: Dental LED E-generator Push button type, LED high speed handpiece, Triple Water Spray
Needle Change Type: Push Button
Air Pressure: 180~250 KPa (1.8~2.5 kgf/cm2)
Water Pressure: 198Kpa (2 kg)
Rotation Speed: 28,000-35,000rpm
Noise: ≤60dB
Specification of Low Speed Handpiece
- E-type connector
- Wrench type
- Precise technology, Steady, no vibration while revolving, offering a steady operation.
- Suitable for any E-type handpiece accords with ISO standard
- 135°C Autoclavable, suitable for both steam and chemical autoclave
Contra angle handpiece
- Low Speed 28,000-35,000rpm
- The shank of the instrument mounted therein is 2.35 mm
- Fastening of the instruments with a turning latch
- Autoclavable 135°C
- For any lab or E-type motors
Straight Nosecone
- Working pressure: 0.3MPa ;
- 0.25MPa (Measure meter is installed at the end of air motor to measure the air pressure).
- Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise)
- Noise: ≤68dB
- Air consumption: about 56L/min
- Ratio: 1:1
- Max speed of contra angle: 25000rpm/min.
Air Mortor
- Supply air pressure: 245-392KPa (2.5-4kgf/CM2)
- 1:1 Direct Drive
- 4 Hole
- Max speed 20,000 min-1
Specifications
Air-in Pressure(kg/c㎡): 2.5 3 4
Motor Rotation(rpm: 22,000 25,000 27,000
Air Wastage:(N1/min):42 51 72







