Gently Remnder: If you click on "Buy It Now" button in a listing, you have committed to purchase the item, thus you are obligated to complete the purchase by sending full payment to the seller. In the event you don't pay for it, or even if you have changed your mind, you still violate the unpaid item policy, and would be reported to eBay!

This is Haro Lineage Air Master Bashguard 26, still in the unopened box, direct from factory. The Lineage 26" Air Master was created to take a DNA strand or two from Haro past and thread it into state of the art contemporary designs of the present. Look at this masterpiece, from a glance its difficult to tell from the original 30 years prior. But when you look closely, you will see all modern technology. Investment cast dropouts, Mid BB, internal headset. Forks are full heat treated and butted same as the Kneesaver bars and Fusion alloy 22mm cranks. This bike is as high level BMX you are going to buy in today's market. Surprise gift waiting for final buyer!


SPECS:

  • Frame: Lineage Master Bashguard 26" frame - 22.5" full crmo, internal h/t crmo - with removable rotor tab mounting holes, removable brake mounts
  • Fork: Haro Fork with 990 mounts and internal cable routing, 28mm offset, 3/8" axle, cr-mo steerer, tapered fluted legs
  • Color: Neon Red
  • Cranks: Haro Lineage heat treated 3-piece alloy 175mm cranks (bolt drive interface) rsd and lsd, 22mm spindle
  • Bottom Bracket: Sealed Mid BB
  • Sprocket: Fusion disc sprocket, cnc bolt drive sprocket, 5mm alloy ring, 1/2" x 1/8" x 41t, solid ring w/machined teeth, included sprocket adapter
  • Gearing: 41/17
  • Pedals: Haro Fusion, alloy pedal body, crmo axle
  • Chain: KMC K1SI, 1/2 x 1/8, Narrow Silver Super Lite
  • Tires: Kenda Kranium tire 26 x 2.25, 60 max psi
  • Front Hub: 48h alloy hub body, 3/8" x 100w x 155l, crmo 155mm straight axle, 2 sealed bearings
  • Rear Hub: Haro Lineage sealed bearings, 17t Freewheel, 17mm steel flange axle nuts, all hardware in CP finish including cone nuts, axle nuts
  • Rims: Haro Lineage 26 x 1.75", 48h (w200) double wall welded joint
  • Brake: Dia-Compe FS996 'Hombre' u-brake, cold forged aluminum arms, dual spring tension adjustment w/anchor bolt parts
  • Brake Lever: Dia-Compe 'Tech-77' lever without stopper, right and left side, diecast aluminum bracket with hinged clamp, cold forged aluminum lever
  • Rotor: Teflon bearing gyro - full cnc 6061 T6 included a-plate
  • Grips: Haro team grip, 145mm length x 29mm diameter, 50mm od flange (low), kraton a15 material (super soft)
  • Handlebar: Lineage kneesaver bar 8.5", 100% heat treated, multi-butted
  • Stem: Haro Lineage fusion top load stem, T6 alloy, cold forged with cnc, 52mm 
  • Headset: Sealed Integrated, 1 1/8"
  • Seat: Haro Fusion slim stealth pivotal seat
  • Seat Post: Haro Fusion stealth pivotal seat post, 25.4 x 300mm
  • Seat Post Clamp: Haro Fusion twintorc clamp, alloy 6061
  • Pegs: 6061 alloy pegs, 34mm od, 110mm length, include 4 total pegs
  • Weight: 34.6lbs

GEOMETRY:

  • Size- 22.5
  • Head Angle- 73°
  • Seat Angle- 69°
  • Top Tube- 21" (571.5mm)
  • Seat tube length- 10.2" (368mm) 
  • Chainstay- 13.7" (461mm) 
  • BB height- 11.5" (293mm) 
  • Standover height- 21.5" (546mm)