Please tighten the filter by yourself when installing it.Please fill the filter with fuel when installation.
High Performance: Filters are designed for high performance applications,and with flow rate of 15 GPH on the R12T model. Remove water and particles down to 10 microns in size,ensures that fuel arrives at your engine clean and water-free with its advanced high-capacity filter media.Provides best protection to your engine and improve its performance.
Durable Materials: The filter housing is coated with a durable, corrosion-resistant electrostatic powder coating for superior surface quality. It can operate stably for a long time in harsh ocean or lake environments.
Reusable clear nylon collection bowl with self-venting drain to remove unwanted impurities and water. Tighten the valve and the water will not drain out. Loosen the valve and the water can drain freely. Keep the system running efficiently.
Easy Installation: This spin-on filter design is easy to replace, NPT, Inlet/outlet thread size: ZG1/4-19(Include 2 fittings,2 plugs). Make sure fittings and connections meet this specification. Part Number:Replaces For S3240 R12T 120AT;Replaces For 18-7987;Replaces For RK10222.
NOTE: Regular maintenance is critical to the longevity and efficiency of your R12T filter. It is recommended to keep the oil cup and filter element clean and regularly inspected and replaced.
Package includes: 1 * R12T Fuel Water Separator Filter.
Specifications:
These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
Part Number:Replaces For S3240 R12T 120AT;Replaces For 18-7987;Replaces For RK10222
Maximum Flow Rate:15 GPH (57 LPH)
Filter Rating:10 Micron.
Inlet/outlet thread size: ZG1/4-19
Base Connection for Filter Port / Thread Size: M18 x 1.5
Installation instruction:
1.Nylon collection bowl down when installed the water separator and filter.Lube the O-rings of filter.
2.There are 4 ports,two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3.Before installed the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.