eBay

Dear Buyer,

Condition is excellent but Please pay attention to the detail pictures for better understanding about body condition, actual unit may have very minor marks / scratches and The pictures are a part of the description, Please look at all of them carefully. You will get what is shown on the pictures.

It fully tested and all functions work.

***It comes with power supply only.***

OVERVIEW:

The Extron DTP HDMI 4K 230 Tx is a transmitter for sending HDMI, audio, and bidirectional RS‑232 and IR signals up to 230 feet (70 meters) over a shielded CATx cable to Extron DTP®‑enabled products. It provides an economical and effective means for extending HDMI with embedded multi-channel audio from HDMI-equipped devices. In addition, the DTP HDMI 4K 230 Tx accepts analog stereo audio signals for simultaneous transmission over the same shielded twisted pair cable. It supports video signals at resolutions up to 4K. The compact enclosure size and remote power capability make the DTP HDMI 4K 230 Tx ideal for discreet placement in lecterns, beneath tables, or wherever needed to meet application requirements.

DESCRIPTION:

The HDCP-compliant DTP HDMI 4K 230 Tx enables the reliable transmission of HDMI signals, supporting Deep Color up to 12‑bit, CEC pass-through, and embedded HD lossless audio formats. In addition, DDC communication of EDID and HDCP is continuously maintained between a source and display, ensuring direct compatibility and optimal signal transmission between devices. The DTP HDMI 4K 230 Tx also provides a connection for sending stereo analog audio to a DTP‑enabled matrix switcher, switcher, or signal processor. The analog stereo audio signal is sent over the same shielded twisted pair cable as the HDMI and control signals, eliminating the need for a separate cable run to support analog audio at the DTP‑enabled product.

The twisted pair transmitter provides other convenient, integrator-friendly features designed to help simplify installation. The DTP HDMI 4K 230 Tx supports simultaneous transmission of bidirectional RS‑232 and IR signals from a control system for AV device control. Also, the transmitter can be remotely powered over the shielded twisted pair cable by a DTP‑enabled product, allowing both devices to share one power supply.

The DTP HDMI 4K 230 Tx can be integrated with an Extron DTP CrossPoint Presentation Matrix Switcher, or other DTP‑enabled products to support sources at remote locations. The transmitter is housed in a 1" (2.5 cm) high, quarter rack width metal enclosure. The low profile design of the DTP HDMI 4K 230 Tx allows for discreet placement in lecterns and beneath tables.

Extron recommends Extron-certified XTP DTP 24 shielded twisted pair cable, shielded RJ-45 plugs, jacks, and couplers engineered for optimum signal transmission with Extron DTP Series products. The XTP DTP 24 cable is certified to 475 MHz, and utilizes a SF/UTP design with four unshielded 24 AWG twisted pair conductors inside an overall braid and foil shield for superior performance and noise immunity.

FEATURES:

Transmits HDMI plus control and analog audio up to 230 feet (70 meters) over a shielded CATx cable — The DTP HDMI 4K 230 Tx provides high reliability and maximum performance on an economical and easily installed cable infrastructure.

Inputs: One HDMI, one 3.5 mm stereo mini jack for audio

Output: One DTP® 230 twisted pair output on RJ-45

Supports computer and video resolutions up to 4K

Supported HDMI specification features include data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D, HD lossless audio formats, and CEC pass-through

HDCP 2.3 compliant — Ensures display of content-protected 4K video media and maintains interoperability with earlier versions of HDCP.

Remote power capability — For simplified installation, the transmitter can be remotely powered by a DTP-enabled product over the twisted pair connection.

Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance

Compatible with CATx shielded twisted pair cable — Shielded twisted pair cabling with solid center conductor sizes of 24 AWG or better is recommended for optimal performance.

Accepts additional analog stereo audio signals — The DTP HDMI 4K 230 Tx accepts stereo analog audio signals for simultaneous transmission over the same shielded twisted pair cable. Analog audio is not embedded onto the digital video signal.

Bidirectional RS-232 and IR pass-through for AV device control — Bidirectional RS-232 control and IR signals can be transmitted alongside the video signal, allowing remote AV devices to be controlled without the need for additional cabling.

Supports multiple embedded audio formats — The DTP HDMI 4K 230 Tx is compatible with a broad range of multi-channel audio signals, providing reliable operation with HDMI sources.

Supports EDID and HDCP transmission — DDC channels are actively buffered, allowing continuous communication between source and display.

Compatible with all DTP 230 Series receivers and DTP-enabled products — Enables mixing and matching with desktop and wallplate receivers, as well as other DTP-enabled products to meet application requirements.

LED indicator for signal presence and power — Provides visual indication of system status for real-time feedback and monitoring of key performance parameters.

RJ-45 signal and link LED indicators for DTP port — Provides a means for validating signal flow and operation, allowing quick identification of connectivity issues.

UL 2043 plenum rated — The DTP HDMI 4K 230 Tx meets UL 2043 for smoke and heat release installation within a plenum airspace above a drop ceiling - power supply excluded. Above-the-ceiling placement conceals the transmitter to prevent theft, and is convenient for installing equipment when space inside the room is limited.

JITC Certified — Successfully completed interoperability and information assurance testing for use in government applications and other mission-critical environments.

1" (2.5 cm) high, quarter rack width metal enclosure — With a low profile enclosure, the device can be installed discreetly wherever needed.

Includes LockIt® HDMI cable lacing brackets

External Extron Everlast™ power supply included, replacement part #70-1174-01 — Provides worldwide power compatibility with high‑demonstrated reliability and low power consumption

SPECIFICITIES:

Frame rate1

24, 25, 30, 50, or 60 fps

Chroma sampling1

4:4:4, 4:2:2, or 4:2:0

Color bit depth1

8 bits per color

Signal type

HDMI 1.4, HDCP 2.3

Max. video data rate

10.2 Gbps (3.4 Gbps per color)

NOTE

1Subject to the maximum data rate limit. Use our calculator (www.extron.com/8Kdatarate) to determine video parameters supported by this data rate.

NOTE

This product consists of a transmitter (DTP HDMI 4K 230 Tx) and a receiver (DTP HDMI 4K 230 Rx), sold separately, with twisted pair cables linking the transmitter and receiver.

NOTE

*Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.

Video

Maximum data rate

10.2 Gbps (3.4 Gbps per color)

Maximum pixel clock

300 MHz

Resolution range

Up to 2560x1600* @ 60 Hz or

4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz,

4K/UHD @ 60 Hz with 4:2:0 chroma subsampling

(* reduced blanking)

Color bit depth

8, 10, or 12 bits — subject to the maximum data rate limit

Formats

RGB and YCbCr digital video

Standards

DVI 1.0, HDMI 1.4, HDCP 2.3, CEA-861E

Video input — transmitter

Number/signal type

1 single link HDMI (or DVI-D*)

Connectors

1 female HDMI type A

Interconnection between transmitter and receiver

Connectors

1 female RJ-45 per unit

Termination standard

TIA/EIA T568B

Signal transmission distance

1080p @ 60 Hz

Up to 230' (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable

2560x1600 @ 60 Hz

Up to 130' (40 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable

4K/UHD @ 30Hz and 60 Hz

Up to 130' (40 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable

Cable requirements

Solid conductor, 24 AWG or better

Cable recommendations

400 MHz bandwidth, STP (shielded twisted pair)

NOTE

Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.

Video output — receiver

Number/signal type

1 single link HDMI (or DVI-D*)

Connectors

1 female HDMI type A

Audio

Gain

Unbalanced output: 0 dB; balanced output +6 dB

Frequency response

20 Hz to 20 kHz, ±0.5 dB

THD + Noise

0.03% @ 20 Hz to 20 kHz at maximum output

S/N

>90 dB, at maximum output (15 dBu), balanced (unweighted)

Stereo channel separation

>80 dB @ 1 kHz to 20 kHz

Audio input

Number/signal type

1 PC level stereo, unbalanced

NOTE

Analog audio is not embedded onto the digital video signal. Embedded digital audio is not de-embedded from the digital video signal.

Connectors

(1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground)

Impedance

>10k ohms, DC coupled

Nominal level

-10 dBV (316 mVrms)

Maximum level

+7 dBV (unbalanced)

NOTE

0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output

Number/signal type

1 stereo (2 channel), balanced/unbalanced

Connectors

(1) 3.5 mm captive screw connector, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

±0.1 dB channel to channel

Maximum level (600 ohm)

>+11 dBu, balanced

Control/remote — external device (pass-through, unidirectional or bidirectional)

Serial control port input/output

Transmitter

RS-232 via (1) 3.5 mm, 5 pole captive screw connector for RS-232 control (±5 V) (connector is shared with IR control port)

Receiver

1 set of proprietary signals on a female RJ-45 jack

Serial control port output/input

Transmitter

1 set of proprietary signals on a female RJ-45 jack

Receiver

RS-232 via a 3.5 mm, 3 pole captive screw connector

Baud rate and protocol

300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity

Serial control pin configuration

1 = Tx, 2 = Rx, 3 = Gnd

IR control port

(1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)

TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz

IR control pin configuration

3 = Gnd, 4 = IR Tx, 5 = IR Rx

General

Power supply

External

Input: 100-240 VAC, 50-60 Hz

Output: 12 VDC, 1.5 A, 18 watts

Power consumption

Transmitter

Device

2.5 watts, 12 VDC

Device and power supply

3.4 watts, 100-240 VAC, 50-60 Hz

Receiver

Device

4.2 watts, 12 VDC

Device and power supply

5.8 watts, 100-240 VAC, 50-60 Hz

NOTE

Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the twisted pair cable.

Temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing

Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Convection, no vents

Thermal dissipation

Transmitter

Device

7.4 BTU/hr

Device and power supply

10.4 BTU/hr

Receiver

Device

13.0 BTU/hr

Device and power supply

18.7 BTU/hr

Mounting

Rack mount

Yes, with optional 1U high rack shelf

Furniture mount

Yes, with optional under-desk mounting kit

Enclosure type

Metal

Enclosure dimensions

Transmitter

1.0" H x 4.3" W x 3.0" D (quarter rack wide)

(2.5 cm H x 10.9 cm W x 7.6 cm D)

(Depth excludes connectors.)

Receiver

1.0" H x 4.3" W x 6.0" D (quarter rack wide)

(2.5 cm H x 10.9 cm W x 15.2 cm D)

(Depth excludes connectors.)

Product weight

Transmitter

0.5 lbs (0.3 kg)

Receiver

1.0 lb (0.5 kg)

Regulatory compliance

CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES, VCCI,

Complies with the appropriate requirements of RoHS, WEEE

UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply.

NOTE

**CE and FCC testing is conducted with STP (shielded twisted pair) I/O cable.

Product warranty

3 years parts and labor

Everlast power supply warranty

7 years parts and labor

NOTE

All nominal levels are at ±10%.

NOTE

Specifications are subject to change without notice.

(4896-D19)

Shipping Dimensions and Weights

Part # Height Width Depth Weight

60-1271-12 9.5" (24.1 cm) 7.13" (18.1 cm) 2.