Dear Buyer,

Please pay attention to the detail pictures for better understanding about body condition, actual unit may have minor marks / scratches and The pictures are a part of the description, Please look at all of them carefully. You will only receive what you see in the ad photos or same item with 95% similar condition.

It fully tested and all functions work.

Item comes with Australian type power cord only.

Overview

This PA amplifier has been designed to meet the requirements of small to medium sized professional public address installations. Frequency response extends from 40Hz to 10kHz at a total harmonic distortion (THD) of less than 0.5%. Features such as push to talk (PTT) auxiliary muting, three combined balanced line microphone / stereo line inputs, tape out, and separate bass and treble controls give this amplifier a wide scope of installation applications, including schools, public halls, workshops and sporting complexes. Output may be 100V line or low impedance (8 – 16Ω) speaker loads. This unit features thermal overload shutdown, over current and short circuit protection.

Vox muting: The VOX circuit allows telephone paging via line input one or two (selectable internally). When paging via the telephone, all other line inputs are muted (ie. background music). Features variable sensitivity and time delay settings.

Key Features:

Push to talk (PTT) muting on microphone 1

3 balanced microphone inputs

Built in VOX muting circuit

3 stereo line inputs

Bass and treble tone controls

Tape output

Output terminals for 100V line and 8 – 16Ω loads

240V AC operation

Built in short circuit protection

Thermal shutdown circuit protection

Specifications:

General

Power Output:. 30 Watts RMS

T.H.D.: typically < 0.5% @ 1kHz

Frequency Response:

Microphone: 52Hz – 10kHz, ±3dB

Auxiliary: 40Hz – 10kHz, ±3dB

Speaker Outputs: 100V (330Ω) (floating) or 8 – 16Ω (0V referenced)

Noise Level: All volume controls min: Typically 76dB below rated output (All inputs display same signal to noise ratio)

Dimensions: ≈ 300W x 220D x 80H mm

Weight: ≈ 4.1kg

Colour: Black

Accessories: IEC Mains Lead

Output Connectors

Speakers: Screw Terminals

Tape Output: RCA Stereo Socket

Input Sensitivity

Mic 1: 2.6mV Balanced or 3.2mV Unbalanced

Mic 2: 2.6mV Balanced

Mic 3: 2.6mV Balanced

Aux 1: 150mV

Aux 2: 150mV

Aux 3: 150mV

Muting

PTT Via Microphone

Switch Contacts

or Optional VOX Muting

-79dB below rated output

Input Connectors

Mic 1: 5 pin DIN balanced or 3 pin XLR balanced or 6.35mm jack unbalanced

Mic 2: 3 pin XLR balanced

Mic 3: 3 pin XLR balanced

Aux 1: RCA Stereo Socket

Aux 2: RCA Stereo Socket

Aux 3: RCA Stereo Socket

240V AC Power: IEC Type Chassis Socket

Controls

Input 1 (Mic 1 / Aux 1): Volume

Input 2 (Mic 2 / Aux 2): Volume

Input 3 (Mic 3 / Aux 3): Volume

Bass: ±10dB @ 100Hz

Treble: ±13dB @ 10kHz

Power: On/Off Switch

Power Supply: 240V AC

Indicators: Power on LED

Protection: AC Fuse 0.5A, DC Fuse 2 x 3A (internal)