4mm Chicken Feed Pellet Mill Machine 220V 150kg/h |
| Notice: 1, Iron or stones cannot be put into the griller. 2:Check the elasticity of the belt, and the bearing frequently. Add oil in time when it needs to. |
 |
 |
| Precautions 1.When using, it should be noted that there should be no foreign matter such as stones and iron blocks in the raw materials. After the pellet machine has been working continuously for more than ten shifts, the pressure roller oil hole, the universal joint oil hole, and the linkage shaft oil hole need to be filled with high-temperature lubricating grease to make the pressure roller Good working performance and extended bearing life. 2.During granulation, it is strictly forbidden for the pressure roller to contact with the template t o run idly, and the continuous feeding can not be interrupted. At the same time, the pressure roller shaft nut is locked to avoid loosening and damaging the spindle keyway. 3.When granulating, there is no granulation, no discharge, the template should be removed, and after opening one by one, some fiber feed can be added appropriately to restart the granulation 4.Always check the tightness of the screws in each part of the machine. If there is oil leakage in the gearbox, replace the oil seals in time, and check whether the bearings in the machine head are short of oil. 5.When the pellet machine is working, do not reach into the feeding port with your hands. If necessary, use wooden sticks to help feed the pellets. 6.Before turning on the machine, it is necessary to add less material before turning on the 7.If the machine is stuck in operation, stop it immediately, press the pressure roller until the bolt is flat, and then restart the machine. |
| Features： This machine can quickly make chicken feed, The output is up to 150KG per hour. Grinding disc hole diameter is 4MM.
The feed processed by the machine is smooth and has moderate hardness. The microorganism and parasite can be killed during the process by extrusion. The temperature-change during the process is slight so the nutrition can be contained very well. Voltage: 220V |
 | |
Operation: 1: Add oil into gearbox before start. 2:Double-check the belt and the screws before operation. 3:Clean up the rest after use to prevent damage to the machine. | |
|
On May 13, 2022 at 21:01:28 PDT, seller added the following information: