Pools - Spas - Stoves - Fireplaces

Routine Maintenance:

2-3 fl oz per 10,000 gallons of water.

Light Algae Growth:

11-17 fl oz per 10,000 gallons of water.

Initial Treatment of Clean Pools:

6-11 fl oz per 10,000 gallons of water.

Pre-Treatment Checklist:

1. Ensure all equipment is working properly.
2. Backwash the filter system following manufacturers directions.
3. Adjust the pH to between 7.2-7.6.
4. In chlorinated systems, add stabilizer to establish a minimum stabilizer level of 30-40 ppm to reduce the degradative effects of sunlight upon the chlorine residual.
5. Check for metals and if present add a stain and scale inhibitor to prevent staining of pool surface due to metals.
6. Adjust chlorine residual to 1-3 ppm. When using other products as outlined in directions for this product, always follow directions on those products.

Standard Application:

1. For pools having light algae growth, pour the initial dose of 11-17 oz. per 10,000 gallons of water directly into pool.
2. Remove settled algae debris by cleaning.
3. For treatment of a freshly cleaned and filled pool, pour the initial dose of 6-11 oz. per 10,000 gallons of water directly into pool.
4. Additions of 2-4 oz. of this product per 10,000 gallons of water should be made every 5-7 days after initial treatment for maintenance.

Wait at least 15 minutes after application before entering pool.

Ingredients:

• Poly [Oxyethylene (Dimethylininio) ethylene (dimehylimino) ethelene dichloride]: 60%, Other Ingredients: 40%