PLEASE NOTE: This kit comes with a set of Triple RS36 Carburetors only. There is 3 other variations of this kit available and they are all separate listings.

This Mikuni RS36 carburetor Kit will breathe a whole new lease of life into your machine with an up to 25% increase in power, whilst making it perform and operate as it should with no hesitations or flat spots.

You will very quickly realize that the expense of a rebuild of your old worn OEM carbs can far exceed the cost of these new units and unfortunately as with many rebuilds now days you only have the option in many cases of gambling with very poor quality aftermarket parts. Considering this and if intending to ride and enjoy your motorcycle for years to come, it makes good sense to retire your OEM carbs into the cupboard and step up to a set of RS’s, the improvement will be very impressive.

Before rushing in and ordering please firstly check your carb spacing and carbie sizes for compatibility.

These carbs measure 100mm front to back length and 55mm OD at the air-filter inlet end and 42mm OD at the outlet, they are a direct fit if replacing Mikuni CV Carbs. The OEM throttle cables on XV Yamaha Virago’s fitted with Mikuni CV’s will fit these RS carbs where models that have Hitachi carbs, will not. When replacing Hitachi carbs, you have the option of having your cables modified elsewhere to fit or you can take the carb option supplied with our accessory throttle and cable combo. The Hitachi carbs are also around 16mm longer than the CV’s and the new RS Carbs, where if wanting to retain your stock air-box we can fit 16mm extenders to your new carb set. Another popular remedy for this is using POD’s where these are found in the “RS carb accessories” page found in the main menu “RS Smoothbore Kits multi Cylinder” drop list.

This Mikuni kit comes with the following carb throat centre to centre spacing’s for direct fitment to Yamaha  XS750 and XS850 triple models and others with simular carb spacing measurements.

A= 90mm (spacing centre to centre between carb 1 & 2)

B= 90mm (spacing centre to centre between carb 2 & 3)

Pilot Jet: VM28/486-17.5, Needle: 9DZH1, Needle Jet: P-4 (568 Series), Main Jet: N100.604-120/130

A spare set of size 15 pilots are provided and may need fitting when using the stock air-box. Two spare sets of mains are also provided for WOT testing for confirming correct tune. Other than that bolt them on and hold on.

You can also buy separately either POD filters or Velocity stacks for racing, which have no form of filter in them (15, 30,50 and 75mm long).

Additional Information:

Please Note: Other than exact replacement OEM carburetors, all Mikuni Aftermarket Carburetors and Tuning Components are sold “As Is” for Off Road / Racing Use Only and are not intended or approved for use on vehicles operated on Public Roads or in locations where applicable engine tampering and anti-pollution laws apply.

 Australian Shipping Information:

All shipping within Australia is via Australia Post only.

Please note that we are located at Townsville North QLD and that all standard shipping “Free Freight” travels by train from us all the way down the East Coast as far as Victoria. EBay freight times are estimates only and do not take in to account our location. We have express options available for all our products also. The freight times around Australia are as follows-

Standard or eBay “Free Freight”

Townsville to Brisbane 3 days, Townsville to North/Just South and West is usually 1-2 days,

NSW ACT & VIC 4-6 days, TAS & SA 4-8 days, WA & NT 8-12 days.

Express Freight

Anywhere in QLD except some rural areas is next day delivery. NSW ACT & VIC 2 days, TAS & SA 2-3 days, WA & NT 3-4 days.

Please note that weather events such as flooding, cyclones and other natural disasters etc will delay any ground freight. This is entirely out of our control if this occurs.

 International Shipping Information:

All international shipping is done through Australia Post Express Courier EMS service.

The international service we use is generally 4-5 Business days for delivery but can be shorter or longer.

 All international buyers are responsible for the payment of their domestic customs duties and taxes charged on imported goods. The duty-free threshold and duty/taxes payable rates differ from one country to another and we strongly advise you check your liability before ordering if unsure. Please check your tracking on all international shipments within 7 days to follow their progress and determine if it is being held by your local customs dept. or on their behalf by the Postal Service, who you will need to contact using the provided tracking number.

 As per the eBay terms and conditions, WE ARE NOT RESPONSIBLE AS A SELLER FOR YOUR COUNTRIES IMPORT DUTIES OR TAXES, WE HAVE NOT NOR WILL WE EVER PAY YOUR IMPORT DUTIES OR TAXES, OR REFUND ANYONE FOR THEM AND THEY ARE DEFINITELY NOT INCLUDED IN THE ITEM PRICE! PLEASE CHECK YOUR COSTS BEFORE MAKING THE PURCHASE! THIS IS JUST PLAIN OLD COMMON SENSE.

 Please also note that international parcels HAVE to be signed for and all parcels whether domestic or international are fully insured.

 Returns and Refunds:

Our business Warranty or Return period is 7 days only. We do accept eBay’s 30 day return policy but please read all the information below carefully before making your purchase.

THE FOLLOWING INFORMATION IS FINAL.

Here at Mikuni OZ we do offer refunds and returns but there are strict procedures for this.

All carburetor kits that need to be returned for refund or exchange MUST be returned in the exact same way they left the warehouse. All Carburetors & Carby kits that have been opened WILL BE thoroughly stripped and inspected, in the case of any fuel being added, greases or lubricants, tampering or any form of damage to the carburetor there will be ABSOLUTELY NO refund and the kit will be returned to you at your expense! THIS IS FINAL AND NO OTHER EXCEPTIONS!

Absolutely all returns for any reason will be charged a 10% restocking fee whether it has been opened or not before it was returned and the freight for us to send you the kit originally will be deducted also before your refund is issued.