- We are Albionshire Diagnostics (UK), the authorised UK distributor for iCarsoft
- What you see is what you get, we show actual photos of the original tool unlike other unscrupulous sellers who use faked photoshopped images
- This is a genuine and official model with a 1 year UK warranty
- Brand new and unused
- Comes with a LIFETIME OF FREE UPDATES, there are no VIN limits or restrictions, you can use it on as many cars as you like!
- Provides dealer level / OE (original equipment) comprehensive diagnostics (ALL systems scanning, read / clear fault codes, live data) for Porsche - works on older and newer models. *Please check compatibility with us if you're not sure.
- Beware of 'OBD2II' tools claiming to offer car diagnostics, such tools are only capable of reading generic OBD2II engine and emissions related fault codes. NOT in-depth dealer level scanning of modules and manufacturer related fault codes. This is the reason why dealer level / OE tools cost thousands of pounds.
- The iCarsoft POR 3.0 Supports over a dozen maintenance functions unlike cheaper scanners which only support 1 or 2 functions:
- Oil Light/Service Reset: Support service lamp/ service interval reset.
- EPB (Electronic Parking Brake) system: maintenance deactivates and reactivates the EPB system for replacement and initialization.
- DPF (Diesel Particulate Filter) Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
- ETC (Electronic Throttle Control) system relearns the throttle valve control value while clear or replace the throttle valve.
- SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
- BMS (Battery Management System), registers new battery to the BMS while battery replacement.
- ABS Bleeding: release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
- INJ (Injectors Coding ):relearn the injector control parameter while the injectors renewed or replaced .
- TPMS programming service: It allows you to look up the tire sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
- ECM(Engine): This function supports routine maintenance of engine modules, for example, reset or delete the adaptation values, calculate fuel consumption.
- BSC(Body Stability): This function supports routine maintenance of DSC modules, for example, reset or delete the adaptation values, start-up the unit.
- TCM (Trans adaption): This function supports routine maintenance of transmission modules, for example, reset adaptation values, adjust the oil level.
- SPS(Air Suspension): Try reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off.
- And much more!
- Quick access and help provided via the fault code library for the busy mechanic or workshop
- We have a close working relationship with the supplier. Please get in-touch with us if you have any queries regarding the scanner such as vehicle coverage for diagnostics and maintenance functions or any other query for that matter. At Albionshire Diagnostics we pride ourselves on great customer service, please see our feedback.
All Systems Diagnostics
- Many people don't realise not all scanners are created equally, the cheaper scanners don't provide ALL systems scanning and at best only cover the engine module. Unlike the iCarsoft POR 3.0 scanner, which supports ALL systems scanning beyond the engine module such as PCM (Powertrain Control Module), RCM (Restraints Control Module), IPC (Instrument Cluster Control Module), PBM (Parking Brake Control Module), ATCM (All Terrain Control Module), RLM (Ride Level Control Module) and MANY MORE. If you're a Porsche specialist whose used a dealer level tool before, you'll definitely know what we're talking about as those modules should be recognisable to you.
- Comes with FREE updates for LIFE
- Comprehensive support for PORSCHE from the year 1996 toup to approximately two years prior to the current model year. *It may work on newer (current year) vehicles but we can't guarantee it.* The free regular updates will ensure current year vehicles are eventually supported.

COVERAGE:
911 (991)
911 (996)
911 (997)
918 Spyder
Boxster/Cayman (981)
Boxster/Cayman (982)
Boxster/Cayman (986)
Boxster/Cayman (987)
Carrera GT
Cayenne-9PA
Cayenne-92A
Cayenne-9YA
Macan
Panamera-970
Panamera-971
Easily Diagnose faults
Provides an easy to use interface to access comprehensive diagnostics across ALL electronic control modules, unlike the cheaper scanners.
Supports A Huge Number Of Dealer Level Maintenance Functions
- A professional diagnostic tool must offer maintenance functions specifically aimed at the professional garage or advanced DIYer. This scanner comes with a large number of maintenance functions with comprehensive vehicle coverage for many PORSCHE vehicles

Full List Of Supported Dealer Functions
- Oil Light/Service Reset: Support service lamp/ service interval reset.
- EPB (Electronic Parking Brake) system: maintenance deactivates and reactivates the EPB system for replacement and initialization.
- DPF (Diesel Particulate Filter) Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
- ETC (Electronic Throttle Control) system relearns the throttle valve control value while clear or replace the throttle valve.
- SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
- BMS (Battery Management System), registers new battery to the BMS while battery replacement.
- ABS Bleeding: release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
- INJ (Injectors Coding ):relearn the injector control parameter while the injectors renewed or replaced .
- TPMS programming service: It allows you to look up the tire sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
- ECM(Engine): This function supports routine maintenance of engine modules, for example, reset or delete the adaptation values, calculate fuel consumption.
- BSC(Body Stability): This function supports routine maintenance of DSC modules, for example, reset or delete the adaptation values, start-up the unit.
- TCM (Trans adaption): This function supports routine maintenance of transmission modules, for example, reset adaptation values, adjust the oil level.
- SPS(Air Suspension): Try reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off.
Bi-directional Active Tests

With its bi-directional capabilities, you can programmatically control components such as the windows, injectors and climate control system etc drastically speeding up the time to diagnose problems.
FREE Updates For LIFE
Unlike other tools, this tool comes with a lifetime of FREE updates. As part of the regular software update cycle, new vehicles and functions are constantly being added including bug fixes.
Exclusively Designed For PORSCHE

2 In 1 Scanner
You may be surprised but it also works with all OBD-II/EOBD compliant passenger cars from the year 2001+ (petrol) and 2004+ (diesel) to the present - providing you with OBD-II engine and emissions diagnostics ONLY, it will not provide in-depth diagnostics for other brands.

- Ford
- Chrysler
- Mercedes
- BMW
- VW/Audi/Seat/Skoda
- Jaguar
- Volvo
- Vauxhall
- Saab
- Toyota
- Honda
- Nissan
- Mitsubishi
- Mazda
- Subaru
- Suzuki
- Isuzu
- Hyundai
- Kia
- and many more...
Live Data
View live data statistics in real-time such as engine coolant temperature, vehicle speed and intake air temperature and much more.
Genuine and Official
- BEWARE of fakes flooding the market, they may appear CHEAP but in the long run, will cost you more due to incomplete support
- We are Albionshire Diagnostics (UK), an authorised iCarsoft distributor
- AVOID fakes, be SMART, be SAFE and buy GENUINE
No yearly expensive subscription fees
This scanner is extremely good value for money, there are no expensive and complex yearly subscription fees.
Specifications
Display: 4.0″ TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V(Typical)
Power Consumption: 1.8W(Typical)
Dimension: 206*104.1*32.6 mm (L x W x H)
Contents
- Nylon Carry Case
- Main Unit
- OBD2 Cable
- USB Cable For Updates
- User Manual
- TF Card