Chevrolet LS 4.8l 5.3l 6.0l VALVE COVER SPACERS
1 INCH THICK 6061 BILLET ALUMINUM
*** Bolts not included with this spacer***
These Spacers are engineered with an additional port on the rear intake manifold side of the head on each side of the motor taped to take a 3/8 pipe fittings to be used for Evacuation Port
SOLD IN SETS (TWO SPACERS).
Made With Pride in Cochranton, Pennsylvania U.S.A. from 6061, U.S.A. Produced, Billet Aluminum!
Some Information about us.
- We are a Manufacture of Billet Valve Cover Spacers and Adaptors.
- All of our Spacers and Adaptors are Made in USA with USA Made Materials.
- With Medice Manufacturing Valve Cover Spacers you no longer have to use tall valve covers to clear enhanced-performance valve train components.
- Utilize your factory valve cover (or any valve cover) and gain space for high performance valve train parts/components.
- We also manufacture valve cover adaptors / conversion kits to put different valve covers on different engines.
Some information about installing our valve cover spacers.
- Use a good quality silicone to seal the spacer to the head.
- IF you are using a tin valve cover (once again MUST be flat) I recommend a gasket between spacer & valve cover.
- MOST IMPORANT everything MUST be clean & MUST use a good quality gasket.
- The BEST silicone I have found is Ford Motorcraft RTV for use on 7.3 Power Stroke Diesel Engines! Motorcraft Part number (TA31). You can get it at your local Ford Dealer.
- We also enclose an information sheet with each set of spacers sold.