The Rotating Clock Divider (RCD) produces eight divided clock tempos from a single input clock

The divisions range from /1 to /64, including all odd and non-standard divisions such as /3 and /17 and /62

A Rotate CV input re-assigns the division number of each jack, allowing for creative mix-ups and experimentation

A Reset input jack helps to sync/start with an external clock

Features

Basic features:
- Divide-by-1 to Divide-by-64, on 8 output jacks
- CV Rotate jack to shift divide-by amount on each jack
- CV Reset jack to reset/re-sync all jacks
- Optional break-out panels to expand functionality (Auto-reset, selectable Divide-by range, Gate/Trigger, Up/Down-counting)
Jacks:
- Clock Input (5V to 15V clock, rising edge triggered), max 3kHz
- CV Rotate (0V to +5V input)
- CV Reset (5V to 15V trigger)
- Divided Clock Outputs (8 jacks):
  - Divide-by-(1+R)
  - Divide-by-(2+R)
  - Divide-by-(3+R)
  - Divide-by-(4+R)
  - Divide-by-(5+R)
  - Divide-by-(6+R)
  - Divide-by-(7+R)
  - Divide-by-(8+R)
  - …where R is the CV Rotation.
- Selectable Gate/Trigger mode:
- Selectable Divide range up to Divide-by-64:
- Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.
- Selectable Auto-reset:
- Auto-reset will reset the divide counter every 16/24/32 clocks, which keeps the beats more “dance-able” even when using the “weird” clock divisions (3/5/6/7/9/10/11/etc..) Two jumper pins on the back can be pre-set with jumpers plugs, or used with breakout panel.

Specifications

33 mA +12V
4 mA -12V
0 mA 5V
Width: 4HP
Depth: 35mm

4ms RCD Rotating Clock Divider Breakout Eurorack Module

BREAKOUT / EXPANDER MODULE FOR 4ms ROTATING CLOCK DIVIDER

4ms Rotating Clock Divider Breakout Eurorack Module has to be connected to the internal jumpers of the RCD and allows for switching the division factors, counting direction and automatic reset.

Counting determines how the RCD counts after having received a reset. Either all outputs will turn “high” after a reset and “low” after the first clock or vice versa (downbeat or upbeat).
Gate / Trig: In GATE position gate signals with half the lenghth of the divisor will be output (e.g. the gate will be 2 clocks long at the 4 output and 1.5 clocks at the 3 output). In TRIGGER position short impulses of 40ms length will be provided at the eight outputs
Max Div sets the highest possible divider factor, either 8, 16, 32 or 64.
Auto Reset determines if the RCD will auto-reset itself and if so, after how many clocks (16, 24 or 32 clocks).

Features

Gate Counting: Down/Up
Gate/Trigger mode
Divide range up to Divide-by-64
Spread mode: Spread mode causes the output to “spread” evenly amongst the entire max division range (see manual).
Auto-reset: 16/off

Specifications

+12V rail
+5V rail: not used
-12V rail: not used
Width: 4HP
Depth: 48mm

(Factory made - 'new other' I guess as they were put in a rack but unused)