.. ...

Greenwood Airvac Series 90 Flush & Surface Models Standard or Timer Versions

Flush (Recessed) Model - 4" (100mm) Flush mounted centrifugal extract fan

Standard (No Timer) - This model is for switching on / off with a separate switch, e.g. a light switch (not supplied). It also has a built in pull cord which can be used to operate it, or this can be snipped off if not required.

Timer - This Model has an Adjustable over run timer. Fan stays on for a time after you turn light off (adjustable up to 30 mins). Pullcord over-ride (can be snipped off if not required),

This is a direct replacement for Greenwood Airvac model number R90T which is now out of production. This fan fits the same "footprint".

  • Mains voltage 230/240V AC 50Hz
  • Extraction rate: 21 litres per second, 75 cubic metres per hour
  • Sound output: 41dB (A) @ 3m
  • Power consumption: 20 watts
  • IP44 rated
  • Suitable for wall and ceiling installations
  • Anti backdraught damper and pull cord insulation link
  • Integral filter to reduce debris getting into the motor and reducing the fans life - easily removed for washing

Dimensions: 240mm wide x 215mm high. 43mm projection beyond surface the fan is fitted to with 180mm projection above ceiling.


Surface Models

Standard (No Timer) - This model is for switching on / off with a separate switch, e.g. a light switch (not supplied). It also has a built in pull cord which can be used to operate it, or this can be snipped off if not required.

Timer - This Model has an Adjustable over run timer. Fan stays on for a time after you turn light off (adjustable up to 30 mins). Pullcord over-ride (can be snipped off if not required),

  • Mains voltage 230/240V AC 50Hz
  • Extraction rate: 21 litres per second, 75 cubic metres per hour
  • Sound output: 41dB (A) @ 3m
  • Power consumption: 20 watts
  • IP44 rated
  • Suitable for wall and ceiling installations
  • Anti backdraught damper and pull cord insulation link
  • Backplate can be fully installed before fan and motor assembly are fixed to enable easy installation
  • Modern, stylish front fascia design
  • Integral filter to reduce debris getting into the motor and reducing the fans life - easily removed for washing

Dimensions: 186mm wide x 160mm high x 142 deep. See extra pictures on listing above. Note height on picture 2 is wrong. Actual height is 160mm.

VAT INVOICE ON REQUEST
Collection available
Monday - Thursday: 7.30am - 4.30pm
Friday: 7.30am - 3pm