Thank you for visiting our store!
PRODUCT DESCRIPTION
Fast, thixotropic, transparent 1-part polyurethane wood
adhesive for indoors and outdoors. Water resistant and filling. Handling
strength within 5 minutes. Bonds also to metal, concrete and synthetics
FIELD OF APPLICATION
For water resistant bonding of most kinds of wood, Formica,
polystyrene foam (tempex) and glass wool to porous surfaces. Bonds also
to metal, concrete, cellular concrete, stone and various synthetics.
Ideal for vertical connections. Not suitable for polyethylene,
polypropylene, P.T.F.E and nylon.
PROPERTIES
PREPARATION
Working conditions: Use only when temperature of room, adhesive
and materials to be bonded is not below +5°C. Wood humidity level
should be between 8% and 16% (max 25%).
Safety: It is recommended to wear rubber or plastic protective gloves.
Condition of materials: Parts to be bonded should be clean, free of dust and well-fitting.
Preliminary treatment: Degrease greasy woods with
thinner. Roughen non-porous materials. Moisten side to which no adhesive
is applied with a damp cloth.
Tools required: Sealant gun, fine-toothed glue spreader (1mm) or brush or roller and clamp.
APPLICATION
Coverage: 5-6m²/kg
Directions for use: Apply adhesive thinly and evenly to
one side, using a fine-toothed glue spreader (1mm), brush or roller.
Join parts within 2 minutes and press or clamp for at least 15 minutes.
Pressure time (+20°C): 15 minutes
Open time: 2 minutes
Stains/residue: Remove fresh stains immediately with acetone. Dried residue can only be removed mechanically.
CURE TIMES
Handling time: Approx 5-10 minutes at +20°C
Dry/Cure time: Remove fresh stains immediately with acetone. Dried residue can only be removed mechanically.
*Curing time may vary depending on the surface, product quantity used, humidity level and ambient temperature.
TECHNICAL PROPERTIES
Temperature resistance: -20°C to +125°C
Chemicals resistance: Good
Paintability: Good
TECHNICAL SPECIFICATIONS
Base: Polyurethane prepolymer
Colour: Transparent
Viscosity (+20°C): Thixotropic
Solid matter: Approx 100%
Density: Approx 1,12 g/cm³
SHELF LIFE
At least 12 months after date of manufacture. Limited shelf
life after opening. Store well-closed in a dry place at temperatures
between +10°C and +20°C.
Our advice is based on extensive research and practical experience. However, in view of the large variety of materials and the conditions under which our products are applied, we assume no responsibility for the results obtained and/or any damage caused by the use of the product. Nevertheless, our Service Department is always at your disposal for any advice.
Please contact us via GluesDirect.co.uk if you require any further information.