Thank you for visiting our store!
PRODUCT DESCRIPTION
Universal, crystal clear construction adhesive and sealant
based on unique SM Polymer technology. For bonding, fixing and sealing
at the same time. Suitable for practically all (building) materials and
all surfaces (even and uneven, porous and non-porous). Crystal clear,
extra strong and permanently elastic. Replaces construction adhesive,
wood adhesive, wood construction adhesive, PU-adhesive, silicone and
acrylic sealant.
FIELD OF APPLICATION
Bonding: e.g. glass, stone, natural stone, concrete,
plasterwork, many plastics, wood, chipboard, trespa, iron, aluminium,
zinc, steel, stainless steel and other metals, ceramic tiles, cork
mirrors.
Fixing: e.g. skirting boards, laths, timber framework,
window sills, doorsteps, roof fascias, panelling and insulation
material, gypsum boards, polystyrene ornaments and decorative edgings.
Sealing: Applications in construction: connecting
joints in (plastic) window frames, roof fascias, roofs, roof gutters,
walls, skylights and chimneys. Sealing joints between window panes and
frames. Not suitable for polyethylene (PE), polypropylene (PP), PTFE, PA
(nylon), acrylic glass (plexiglass) and bitumen.
PROPERTIES
PREPARATION
Working conditions: Use only temperatures between +5°C and +40°C.
Preliminary treatment: Surface must be clean and free of dust and
grease. Use of primer not required. Surfaces may be slightly moist.
Surface must be solid.
Tools: Use sealant gun
APPLICATION
Coverage
Spot bonding: Approx 5-8 m²/kg
Line bonding: 8-15 m for 1 cartridge (depending on diameter of cut off nozzle)
Directions for use
Bonding and fixing: Cut off nozzle to a diameter of at least 0.5cm.
Sealing: Cut off nozzle slantwise at required joint width.
Bonding and fixing: Apply adhesive evenly in vertical
strips or dots (every 10-40cm). Always apply adhesive at corners and
along edges of board material. Attach materials within10 minutes and
press firmly or tap lightly with a rubber mallet. If necessary, secure
or support heavy materials for 24 hours.
Sealing: Inject adhesive sealant evenly into joint and
tool within 10 minutes with a moist putty knife, sealant smoother of
finger (preferably wetted with soap water without lemon). Tool vertical
joints from bottom to top. Surface skin after approx 15 minutes.
Complete cure after a few days (depending on layer thickness).
Stains/residue: Immediately remove wet stains with turpentine. Dried adhesive residue can only be removed mechanically.
CURE TIMES
Skin over time: Approx 35 minutes
Cure rate: 2mm/24 hrs
Full bond strength: Full bond strength after approx 24 hours
*Curing time may vary depending on the surface, product quantity used, humidity level and ambient temperature.
TECHNICAL PROPERTIES
Moisture resistance: Very good
Water resistance: Good
Temperature resistance: From -40°C to +100°C
UV Resistance: Very good
Chemicals resistance: Very good
Paintability: Paintable with acrylic and alkyd paint. Alkyd paint may slow down drying process. Always test in advance.
Elasticity: Very good
Filling capacity: Very good
TECHNICAL SPECIFICATIONS
Base: Silyl Modified Polymer
Colour: Transparent
Viscosity: Pasty
Solid contents: Approx 100%
Density: Approx 1,04 g/cm³
Tensile strength: Approx 210 N/cm²
Shear strength: Approx 290 N/cm²
Flash point: K3 (>55°C)
Shrinkage: Approx 0%
Elasticity E-modules: Approx 0,9 MPa
Elongation of rupture: Approx 250%
SHELF LIFE
At least 18 months after date of manufacture. Limited shelf
life after opening. Store well-closed in a dry, cool and frost-free
place.
Our advice is based on extensive research and practical experience. However, in view of the large variety of materials and the conditions under which our products are applied, we assume no responsibility for the results obtained and/or any damage caused by the use of the product. Nevertheless, our Service Department is always at your disposal for any advice.
Please contact us via GluesDirect.co.uk or by calling 01428 751358 should you require any further information.