Note: A zigbee router must be required to use the send signal.
We do not ship only the receiver, because the receiver must be matched with the valve to use, thank you for your cooperation!
 
Now an upgraded version of the valve plus receiver version that can control both the boiler and the radiator on and off at the same time.
 
A receiver can accept signals from up to 8 valves.
The receiver needs to be installed on the wall and connected to the boiler
 
Receiver and valve need to be paired before control.
Pairing is simple:
Receiver instructions:
Power indicator (green): always on after power on
Load (red): the light is on when the load output is turned on, and the light is off when the load output is off
WIFI signal indicator (blue): continuous fast flashing indicates that the network is being configured, and it will be steady after the network is successfully configured.
 
Our receivers can only be matched with our valves, because the valves will be upgraded before delivery. Do not buy valves from other places to match our receivers. If they cannot be used, we will not take any responsibility! Thank you for your support!
 
 
 
Radiator Thermostat
A wige range of application suitable for housing,shopping mall,hotel heating and central air conditioning temperature control.
 

Product Specifications

Power: 2* AA alkaline batteries Insulating condition: Normal environment Display accuracy:：0.5℃ Running program: Set per 1 week as a cycle Probe sensor:：NTC(10k)1% Size(mm)：53*89.5mm Maximum route：4.5mm Range of temperature display:：1~70°C Default range of temperature adjustment：5~35°C Maximum current：90mA Working environment temperature:：-10~60°C Thread size：M30*1.5

 

Function

1) Time Setting Long press for 3s to access Time Setting. Press to switch into , then press to confirm. Press , to change minutes, hour, week. Press to confirm. 2) Holiday Mode Press to switch into Holiday Mode. Press to confirm. Press , to change temperature and days. Press to confirm 3) Open Window Detection It is default that open window function was closed after put into batteries , and display - - , And open it on advance setting A2 (once change batteries,should set it again) When room temperature suddenly drop into temp threshold, valve close for 15 minutes. After finished, if the room temp is still lower than temp threshold, it will keep this mode. 4) Programmable Mode P2 5+2 days programmable (Default) Long press for 3s to access Programmable Mode. Press to switch into P (5+2 Days, 6+1 Days, 7 Days). Press to confirm.Press , to change value. P0 Manual Programmable(Default) ： Period Default Period Default temperature 1 6:00-8:00 20℃ 2 8:00-11:30 15℃ 3 11:30—12:30 15℃ 4 12:30—17:30 15℃ 5 17:30—22:00 20℃ 6 22:00—6:00 15℃

 
  • we will send them in 2-3 working days, and the shipment time will be about 15-50 working days
  • Your satisfaction is our first priority. We appreciate your positive feedback
  • Please don't hesitate to contact us for everything
  • we will shiped them to worldwild
  • thanks very mcuh and wish you have a nice day^_^
 
PushAuction