6X PRO CHAINSAW CHAIN 16",56DL,3/8LP,0.050 FOR McCULLOCH HUSQVARNA STIHL 16"BAR
FEATURE
Condition: New
MPN1:For HUSQVARNA 15 & 16 INCH MODELS:
33 , 36 , 38 , 40 , 42 , 44 , 45 , 50 , 51 , 133 , 136 , 140 , 141 , 154 , 234 ,
238 , 240e , 242 , 241 , 254 , 257 , 262 , 340 , 346XP , 444 , 345 ,
350 , 351 , EL16 , EL1200 , EL1400 , EL1500 , EL 1600 335XPT,
33 , 36 , 38 , 40 , 42 , 44 , 45 , 50 , 51 , 133 , 136 , 140 , 141 , 154 , 234 ,
238 , 240e , 242 , 241 , 254 , 257 , 262 , 340 , 346XP , 444 , 345 ,
350 , 351 , EL16 , EL1200 , EL1400 , EL1500 , EL 1600 335XPT,
359, 357, 362, 259, 261
MPN2:For STIHL 16 INCH MODELS:
009 , 010 , 011 , 012 , 015 , 017 , 020, 021 , 023 , 025 ,
E10 , E14 019 , 018 ,MS190T , E140 , E160 , MS170 , MS180 ,
MS191 , MS200 , MS210 , MS250 (PLEASE NOTE:
SOME STIHL MS CHAINSAWS USE MIRCO LITE GAUGE .043 CHAIN)
MPN3:For McCULLOCH 16 INCH MODELS:
EB356A , EB358 , 441 , 1436NAV , 1636NAV , 1435A , 1635A ,
1840 , 2316 , 2416 ,3616 , 3816 , MS 1416 , MS4018, CS360
MPN4:For HOMELITE CSP3316
MPN5:For RYOBI:ECS2040 , RCS2040
Fitment Type: Direct Replacement
Bar Length：16" 16inch
Pitch: 3/8 low profile
Drive Link: 56, 56DL
Gauge:.050",0.050",.050inch,0.050inch
Chisel Type: Semi Chisel
PACKAGE INCLUDE
3PCS Chain(16" 56 3/8 .050)
PAY ATTENTION
***This chain is a non-safety professional chainsaw chain***
Note: All Chainsaw chains are a called length, in order for your replacement chain to fit you must always match the pitch, gauge and drive link count !
The drive link count is the number of drive links in the loop of chain, the drive link is the triangular part of the chain that rides in the groove of the guide bar. The gauge is the width of the opening of your guide bar groove (or the thickness of your drive link) and the most common gauges are .043, .050, .058, and .063. Pitch is the actual measured distance between any three rivet heads on the chainsaw chain divided by two, the most common pitches are ¼”, 3/8LP(low-pro), .325, 3/8” and .404. The pitch and gauge of a chain are not easily measured so the pitch and gauge of your chain is best determined by using the chain manufacturing codes from the old chain that are found stamped on the drive links (and all the chain manufacturers use different codes) also many times the pitch, gauge, and drive link count are found stamped on the tail end of the guide bar. If you need any help in determining what size chain you need please contact us.
Note: All Chainsaw chains are a called length, in order for your replacement chain to fit you must always match the pitch, gauge and drive link count !
The drive link count is the number of drive links in the loop of chain, the drive link is the triangular part of the chain that rides in the groove of the guide bar. The gauge is the width of the opening of your guide bar groove (or the thickness of your drive link) and the most common gauges are .043, .050, .058, and .063. Pitch is the actual measured distance between any three rivet heads on the chainsaw chain divided by two, the most common pitches are ¼”, 3/8LP(low-pro), .325, 3/8” and .404. The pitch and gauge of a chain are not easily measured so the pitch and gauge of your chain is best determined by using the chain manufacturing codes from the old chain that are found stamped on the drive links (and all the chain manufacturers use different codes) also many times the pitch, gauge, and drive link count are found stamped on the tail end of the guide bar. If you need any help in determining what size chain you need please contact us.
