High quality low-SWR tuned antenna with N-female connector and pure copper feedline, 824-960MHz.
Need to maximise coverage for HNT or LoRa? Our extra-strong fibreglass antennas feature a precisely tuned pure copper feedline, to maximise Helium hotspot revenue in European 868Mhz deployments. The low loss and extremely low SWR (as low as 1.05) mean that every milliwatt of power is focused efficiently, for maximum range.
They're available in 4.5dBi (0.4m), 6.5dBi (0.6m, this listing), 8.5dBi (1.1m) and 11.5dBi (2.2m) lengths, terminated in an N-female connector. The design is light and strong, and comes with double pole-mount clamps for a wind rating up to 215km/hr - so you can mount the antenna up as high as possible and be sure it's secure.
Please note - we don't supply cables with our antennas. You'll need a high quality cable with an N-male connector, with the other end to suit your equipment. It should be the exact length required, no longer. We recommend LMR400 cable.
- 6.5dBi gain with very low SWR (less than 1.5)
- Batch test results (actual SWR, Smith chart and return loss) supplied with every antenna
- Beamwidth - 360° (horizontal) / 30° (vertical), vertically polarised
- Weight - 475g including mounting kit / Length - 0.6 metres
- N-female connector on antenna end
This range of antennas is designed for a long life outdoors.
- Highly weather resistant sealed fiberglass design surrounding an 8-element collinear copper dipole, with aluminium base and connector. Double waterproofing seals keep the weather out.
- Rated to wind speeds up to 215km/hr (60m/s)
- Operating temperature range -40°C to 60°C. UV resistant and highly waterproof
- Pole clamp included (suits 35mm to 50mm pole diameter)
Designed for use with Helium, FLARM, OGN, LoRa and other 868Mhz applications. Compatible miners and cables include
- Nebra Outdoor Hotspot Helium Miner (requires N-male to N-male cable)
- Nebra Indoor Hotspot Helium miner (requires N-male to RP-SMA male cable)
- Bobcat 300 miner (requires N-male to RP-SMA male cable)
- RAK Hotspot HNT miner (requires N-male to RP-SMA male cable)
- RAK2 Hotspot HNT miner (requires N-male to RP-SMA male cable)
- SyncroB.it HNT Gateway (requires N-male to RP-SMA male cable)
Other models available:
- 0.4 metre / 868Mhz / 4.5dBi
- 0.6 metre / 868Mhz / 6.5dBi
- 1.1 metre / 868Mhz / 8.5dBi
- 2.2 metre / 868Mhz / 11.5dBi
Ships from the United Kingdom. Designed in the UK.