NEW Ton's Performance IGTB Smart coil 4 cylinder with built in igniter & high energy 8mm spark plug wires. 

Kit includes 4 smart coils (no logo), unpinned connectors, terminal pins, and custom cut to fit spark plug wires for an easy universal install. Mounting brackets are not included. Any modification of existing factory mounting plates or new after market plates may be required for installation.

  Auto enthusiasts who have forced induction engines, high RPM engines or run nitrous oxide are aware of the compromises that come with using inductive coils instead of converting to a Capacitive Discharge Ignition system (CDI). While inductive coils deliver a long spark duration with simplicity, they lack the energy to adequately ignite the mixture in the combustion chamber of a highly modified performance vehicle. Conversely, CDIs deliver an intense burst of spark energy, but with practically no spark duration, which makes having the proper air/fuel mixture in the combustion chamber paramount for best performance. This compromise ends with the High-Output IGBT “Smart” Inductive Coils; The first inductive coils that deliver CDI-like spark energy and voltage, and the long spark duration necessary for forced induction- and nitrous-equipped vehicles.

  This unit includes an  Insulated Gate Bipolar Transistor (IGBT) “Smart” Inductive Coils are designed for use on applications that do not have an external igniter.

WHAT IT DOES
These High-Output IGBT “Smart” Inductive Coils each deliver up to 103mJ of spark energy and a minimum of 40,000 Volts—as much as most CDI systems but without the need for a CDI module! These coils provide very long spark duration at full energy, unlike CDI systems and multiple spark systems which fire off small spark events prior to and after its CDI burst to mimic longer spark duration. The full energy delivery and long duration of these High-Output IGBT “Smart” Inductive Coils eliminate the need to compromise energy or duration with your ignition system, and will increase performance in high-boost or high compression engines.

WHY YOU WANT ONE
These High-Output IGBT “Smart” Inductive Coils deliver CDI-like spark energy with the long duration of an inductive coil. They install easily in place of your exiting coils and do not require a CDI module.  High-Output IGBT “Smart” Inductive Coils have a shock and weatherproof design that allows them to be mounted virtually anywhere. And at a cost less than what you would pay for aftermarket LS1 coils—they deliver World-Class performance at a bargain. IGTB High-Output Coils are used on 2,000-horsepower nitrous motors without a CDI, and they perform flawlessly.

RACER FEATURES

·         Deliver CDI-like spark energy—No CDI Module needed!

·         Cost less than aftermarket LS1 coils

·         Can be mounted almost anywhere

TECHNICAL SPECIFICATIONS
Output (no load): 40kV minimum
Output (50pF load): 40kV +/- 10%
Output Energy: 103 mJ +/- 7%
Peak Secondary Current: 102 mA +/- 10%
Arc Duration: 2.9mS +/- 10%
Turns Ratio 71:1
Maximum Current: 19 Amps
Maximum Battery Voltage: 17 Volts
Base Dwell: 3.0 mS
Max Continuous Dwell: 9 mS but don’t exceed 40% duty cycle
Max Intermittent Dwell: 80% duty cycle, 5 seconds maximum
Mating Connector: Packard/Delphi 12162825 “Pull to Seat”
Mating Contacts: Packard/Delphi 12124075 “Pull to Seat”
High Tension Wire Terminal: HEI “spark plug top” Style

8mm Spark plug wires
Wire Diameter: 8mm
Resistance: 500 ohm
Spark Plug Boot Type: 180 degree 
Coil Boot Type: High Energy Ignition (HEI) 90 degree
Conductor: Spiral Wound Alloy
Voltage Rating: 80,000 VAC
Temperature Rating: 600 F Degrees
Fitment: Universal Cut-to-fit
Wire lengths: 4x48" Custom lengths also available upon request

 ***plug boots can be swapped to 90/135 degree upon request ***

Since this is an electrical component that could be damaged if the incorrect settings and not the ones on the instructions are used .... returns are only allowed if the packaging and factory seal is not opened & broken . 

This coils have a 1 year manufacturer warranty with Ton's Performance against defects , but do not cover user wiring and dwell time errors .