Cav / Lucas Fuel injection newest style pump end plate Blades and liner for DPA Diesel Injection Pumps
7135-180, 7139-223, 7123-388
Made in Italy.
Replaces enplates:
7123-576L
7123-576M
Pin can be move to other side for counter clock wise applications.
Some old end plates do not have the steel backing plate as pictured, so it wears out as in picture 5
Other old styles have a metal plate glued in place, this is bad about leaking from the glue failing.
DPA pumps in many Perkins Engines, John Deere, International Harvester, Massey, Long.
**Normally these items do not fit Ford applications**

dieselitems

8007367440

M – F     7:30 - 4:30 CT

"Jason will be your pump man if you let him"

From a Customer who Found Us on Ebay: "Just a note to let you know that the injector pump that you re-built for me works like brand new. If there is anyone here that needs one re-built I will tell them you are THE BEST IN THE COUNTRY". Thank You so much Ken - AZ

I rebuild and set pumps for a living and have been doing so for 35 years. If you would like to send me your pump to be rebuilt, please contact me. Most of the pumps that use this end plate will run about $425.00 to be rebuilt. We can also check and clean your injectors for free, so send them along as well. After checking your injectors, we can give a quote if any fail testing.

Here are some of things that can effect the price:

  • Pump is locked up and/or the main drive shaft is broke.
  • Engine will not start when warm, after sitting from 1-60 minutes. But does start when cool. This may indicates a bad head and rotor.
  • Cam ring in pump is worn, requires inspection during tear down.
  • Pump has excessive rust and corrosion.
  • Housing is damage or unusable.

Here is how it works:

  • Contact me with your pumps Models numbers.
  • I will try to give you a closer estimate based on the problems you describe.
  • Pump must not have been taken apart.
  • Pump must be drained of all fuel as shipping service may return or destroy packages that leak fuel.
  • You ship your pump to me pre-paid. (Packaged well, I can not be responsible for items damaged in shipment)
  • We check the pump and contact you with a full estimate, return shipping cost and time you should expect your pump back. (Normal times are a week to 10 days).
  • If you choose not to have your pump rebuilt after the estimate, all you pay is freight back to you.

Why would you want to do this?

  • Pump will be cleaned, inspected, rebuilt, tested and will look and run great.
  • All fully rebuilt units are invoiced and include a 6 months warranty.
  • We will provide tips for reinstalling as well as some of the parts you may need to do so.
  • We have access to parts, specifications and test equipment to make sure your pump is right.

Remember the call is free, the service is great and my knowledge base covers over 35 years.

Payment for rebuilt pumps must be paypal or Credit Card before we can ship the pump back to you, Thanks.

Please Note: Your fuel injection pump is a very technical devise. Not only does it control your engine it also protects it as well. Repairing your pump yourself is a great way to save money. However, extra care must be used as serious pump and or engine damage can occur. A person repairing their own injection  pump is assuming their own risk.

* Part Name and number are used for reference purposes, and therefore their use does not necessarily reflect the respective manufacturer of the listed item.