Pools - Spas - Stoves - Fireplaces

Dosage

For Visible Algae: 25 fl oz per 25,000 gallons of water.

For Clean Pools: 16 fl oz per 25,000 gallons of water.

Directions for Use

This product is compatible with all EPA registered sanitizers including chlorine, bromine, biguanide, salt water, ozone and mineral sanitized pools. Always maintain chlorine levels between 1-3 ppm. Ensure all pool equipment is working properly. Clean or backwash the filter following the manufacturer's directions.

Initial Application:

1. If visible algae is present, add 25 ounces per 25,000 gallons of water (2 ppm).
2. For clean pools, add 16 ounces per 25,000 gallons of water (2 ppm).
3. Pour directly into the water by distributing product along the edge of the pool.
4. Operate the pump continuously for 24 hours to allow product to distribute evenly and allow the filter to recover removed phosphate.
5. After 24 hours, if necessary, brush dead algae off pool surface. If algae is still present, repeat step 1.

Maintenance:

To prevent algae growth, add this product weekly or after heavy rain at the rate of 4 ounces per 25,000 gallons of water by pouring directly into the water along the edge of the pool. Maintain circulation by running the pump for at least 4 hours after application.

Note: Swimmers can re-enter the pool 15 minutes after application.