Flex Cable for Raspberry Pi Camera Fit For Raspberry Pi, These cables will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. It works great; carefully open the connector on the Pi and slip this one in

Each end of the cable is reinforced with a stiffener to make insertion easier or to provide strain relief

Size Available:

• 15cm
• 30cm
• 50cm
• 1mt
• 2mt

Available in Both Forward (AA) or  Reverse (AB) contact

Flex Cable for Raspberry Pi Camera or Display

Q: How does FFC flexible cable distinguish front and back?

A: If the fingers (or blue reinforcement plate) on both ends of the cable are on the same side, it is called the same direction line (or the same line AA); Faces are called reverse lines (or different lines AB) it is called the same Reverse line

Feature:

• FPC connector pitch 1.0mm
• Strain relief

Please note, tests have been done with up to 2mt length cable on Pi Model B/B+ and a Pi Camera, and it worked great, but 2 meters is really long for this kind of camera protocol, so if you have a very electrically noisy environment (inside a tesla coil?), you may have corrupted images