Relco Black LED or Halogen Inline Foot Slider Dimmer
Ideal for Standard Lamps - RL1104/LED
Trailing Edge Technology
Electronic table or floor class I and II dimmer
General characteristics
- Electronic dimmer for halogen lamps and dimmable LED lamps 100-240V;
- Resistance index to surface current (PTI175);
- Incandescent wire test level (level 1 switch);
- Passing installation on wire;
- Fuse incorporated;
- Light for easy finding in the dark
- Power supply 220-240V~;
Power:
HALO: 40÷250W - LED: 4÷100W
- Power supply 100-127V~;
- Environmental operating temperature 0-35 °C;
- The dimmer has intensity regulation that only guarantees an electronic type disconnection (?)
Instructions
- Operation
It is regulated directly by the cursor.
RT81 LED is equipped with jumpers for setting the minimum, on some LED lamps in fact it is
sometimes necessary to raise the minimum adjustment level to avoid flicker.
Jumper in position "A" = minimum of 20%
Jumper in position "B" = minimum of 30%
Notes
Do not use lamps with an incorporated regulator. The regulator does not separate galvanically.
If it should not work, have the fuse checked by a qualified electrician and, if necessary, have it
replaced with one of the same kind T 1,6 AH 250V ~.
Dimensions
Height 39mm
Length 115mm
Width 71mm
This is dimmer only and has no on/off switch and must not be used in place of an on/off switch.
The dimmer only provides resistance to the electrical current and is not intended to dim the bulb to no light.
Not suitable for G4 capsule lamps